thirdgen

iTrader: (26)

As the title states, I want to clean up my engine bay. How much of this stock computer controlled / emissions related stuff can I get rid of? I am running Megasquirt II standalone, and plan on never using the stock ECU ever again, and I also don't have to pass emissions.

RyanRaduechel

iTrader: (10)

The charcoal canister can be removed for sure. The second and third pictures, I have no idea. With the charcoal canister, the purge valve and related can also be removed.

phillyb

iTrader: (8)

#2 is also related to emissions. i can't recall if #3 is also related.

soviet

iTrader: (10)

You can junk it all. The canister you can remove + the bracket that holds it. Then loop the lines. The emissions stuff you can remove completely as well just take care of the vacuum lines.

thirdgen

iTrader: (26)

Awesome. I was looking at my passengers side this morning and I was like, "this junk needs to go". Thanks for the advice guys!

phillyb

iTrader: (8)

whoa...
schuylkill...
we're close.
horra

thirdgen

iTrader: (26)

Where in pa are you?

phillyb

iTrader: (8)

east stroudsburg
not close, but not far

astroboy

iTrader: (18)

Your pointing at all the wrong ****!

Move your overflow to behind the bumper skin and your washer tank replaced with something small that you can hide (unless you use it all the time...otoh if you never use it like me take it out completely)

Like others have stated you can pitch all that other stuff and cap off the vac source and whatnot.

turbotyla

iTrader: (2)

can i delete all this on my 01 plus car without a cel ?

phillyb

iTrader: (8)

can't a megasquirt get rid of the cels?
idk if you run one, just saying

ILoveOffRamps

iTrader: (2)

#3 is a pulsation damper for the fuel system. It's a returnless system so it's supposed to help smooth the flow to the injectors. I didn't remove it on mine, but removed #1 and #2

Faeflora

iTrader: (2)

Yes, remove all those vacuum lines and that stupid microchip in a box looking thing. Do not remove the thing attached to the fuel lines.

Also, when you do your upgrade get rid of EGR.

thirdgen

iTrader: (26)

EGR is definately gonna go, I didn't forget about that.

vplukas101

Will removing these things get a cel light?

on a stock MSM ecu.

soviet

iTrader: (10)

yes, on a stock ECU removing those will give a CEL with about 95% guarantee.

standalone ecu doesn't "throw a CEL" unless you chose to physically connect the CEL wire and trigger it.