General Miata Chat A place to talk about anything Miata

1st drive

Thread Tools
 
Search this Thread
 
Old 03-03-2008, 09:54 PM
  #1  
Elite Member
Thread Starter
iTrader: (11)
 
IcantDo55's Avatar
 
Join Date: Apr 2007
Location: VA Beach
Posts: 1,996
Total Cats: 51
Default 1st drive

Well took it out for the 1st drive today after having a friend and SamNavy look over the tune idling in the driveway and they both gave me the thumbs up. Well my 1st drive was 12 miles to a friends house to weld up the new exhaust.

Started and ran fine, idles like stock and AF were looking good. I had to take it on the freeway to get there and it was running lean @ 55 so I was adjusting the VE tables as I was driving (thats fun). Was 16-17AF at cruise, not good. After adding fuel in a few cells I tried to just keep the motor in them for the rest of the drive. Seemed to work. Stayed out of boost for now.

Arrived and noticed there was steam coming from the middle of my NEW god speed radiator...great. Must be a pin hole because I can't see coolant just a little steam and I can smell it. Never got hot on the drive tho, I was watching the dash gauge because I still have not played with the easytherm values and it was pegged @ 215* the whole drive. Can these be welded up? I h8 to have to deal with shipping. Guess you get what you pay for.

Overall it went well, I get the car back this weekend and than I can work out some of the bugs.
IcantDo55 is offline  
Old 03-03-2008, 10:03 PM
  #2  
Elite Member
iTrader: (3)
 
AbeFM's Avatar
 
Join Date: Aug 2006
Location: San Diego, CA
Posts: 3,047
Total Cats: 12
Default

You gets rads soldered, not welded. I don't know if it's better to have done or get a replacement, maybe someone else would.

Lean cruise is not such a bad thing, the right amount of lean will get you better mileage too.
AbeFM is offline  
Old 03-03-2008, 10:05 PM
  #3  
Elite Member
Thread Starter
iTrader: (11)
 
IcantDo55's Avatar
 
Join Date: Apr 2007
Location: VA Beach
Posts: 1,996
Total Cats: 51
Default

Originally Posted by AbeFM
You gets rads soldered, not welded. I don't know if it's better to have done or get a replacement, maybe someone else would.

Lean cruise is not such a bad thing, the right amount of lean will get you better mileage too.
'
Aluminum, I just figured they would Tig it??

But how lean it too lean? There got to be a "bad lean"
IcantDo55 is offline  
Old 03-03-2008, 10:37 PM
  #4  
Elite Member
iTrader: (5)
 
johndoe's Avatar
 
Join Date: Mar 2007
Location: NYC
Posts: 1,970
Total Cats: 1
Default

I think 16:1 is good for your gas mileage, not good for your emissions, and may make your egt rise a bit more than 14.7:1 would.
johndoe is offline  
Old 03-03-2008, 10:39 PM
  #5  
Elite Member
iTrader: (24)
 
Bryce's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 3,759
Total Cats: 35
Default

Under light load cruise conditions, you can run as lean as you want until it starts missing/stumbling. 16-17 is probably right at the limit of lean without driveability issues.


...And Johndoe beat me to it.

Last edited by Bryce; 03-03-2008 at 10:40 PM. Reason: Frickin ninjaposters ^.^
Bryce is offline  
Old 03-03-2008, 11:06 PM
  #6  
Elite Member
iTrader: (5)
 
m2cupcar's Avatar
 
Join Date: Jan 2005
Location: Atlanta
Posts: 7,486
Total Cats: 372
Default

If the godspeed have the rows epoxied to the tanks and that's where the leak is coming from, I'd send it back. Otherwise get it patched. A/C shop might be a good option for the repair.
m2cupcar is offline  
Old 03-04-2008, 02:24 PM
  #7  
Elite Member
iTrader: (3)
 
AbeFM's Avatar
 
Join Date: Aug 2006
Location: San Diego, CA
Posts: 3,047
Total Cats: 12
Default

I lean my car out till it pops/skips/stutters. Then I add a bit more fuel till I'm happy. As long as throttle response is good, why not?

Actually, I think you get better mileage from a 16-17 afr, but I drive around at "18-19" all the time.
AbeFM is offline  
Old 03-04-2008, 03:40 PM
  #8  
Senior Member
iTrader: (7)
 
wes65's Avatar
 
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
Default

yeah, i cruise in the 18:1 range as well.
wes65 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LucaCarMods
Build Threads
11
02-14-2016 06:13 AM
shooterschmidty
Engine Performance
8
09-30-2015 10:28 PM
MiataGarage
Engine Performance
5
09-29-2015 11:04 PM
interestedofold
Suspension, Brakes, Drivetrain
5
09-29-2015 01:42 PM
ihiryu
General Miata Chat
9
09-28-2015 10:22 AM



Quick Reply: 1st drive



All times are GMT -4. The time now is 09:26 AM.