EBC recommendations
02-08-2008, 01:06 PM
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
EBC recommendations
So I have a Hydra and have spent a couple days trying to set up the Hydra EBC.
Before, when I had a 15psi spring in my WG (external tial) I could hit 9 psi by 3600rpm.
Now, with a 9psi spring and using the Hydra EBCI can only hit 9psi by 4300rpm and 15psi by 5000rpm.
This sucks. I've worked on tuning the stupid curve and I feel like a fucktard because I can't get the boost response any better than that. My setup obviously can build boost nice and fast so it's obviously the EBC that's sucking.
Can anyone recommend a functional EBC that works or give some tips on how to make the hydra EBC work properly??
Before, when I had a 15psi spring in my WG (external tial) I could hit 9 psi by 3600rpm.
Now, with a 9psi spring and using the Hydra EBCI can only hit 9psi by 4300rpm and 15psi by 5000rpm.
This sucks. I've worked on tuning the stupid curve and I feel like a fucktard because I can't get the boost response any better than that. My setup obviously can build boost nice and fast so it's obviously the EBC that's sucking.
Can anyone recommend a functional EBC that works or give some tips on how to make the hydra EBC work properly??
Reply
0
0
02-08-2008, 01:15 PM
#2
I'm Miserable!
Join Date: May 2007
Posts: 589
Total Cats: 0
So I have a Hydra and have spent a couple days trying to set up the Hydra EBC.
Before, when I had a 15psi spring in my WG (external tial) I could hit 9 psi by 3600rpm.
Now, with a 9psi spring and using the Hydra EBCI can only hit 9psi by 4300rpm and 15psi by 5000rpm.
This sucks. I've worked on tuning the stupid curve and I feel like a fucktard because I can't get the boost response any better than that. My setup obviously can build boost nice and fast so it's obviously the EBC that's sucking.
Can anyone recommend a functional EBC that works or give some tips on how to make the hydra EBC work properly??
Before, when I had a 15psi spring in my WG (external tial) I could hit 9 psi by 3600rpm.
Now, with a 9psi spring and using the Hydra EBCI can only hit 9psi by 4300rpm and 15psi by 5000rpm.
This sucks. I've worked on tuning the stupid curve and I feel like a fucktard because I can't get the boost response any better than that. My setup obviously can build boost nice and fast so it's obviously the EBC that's sucking.
Can anyone recommend a functional EBC that works or give some tips on how to make the hydra EBC work properly??
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
