Basic Map for Hydra
#1
Basic Map for Hydra
Does anyone have a basic map for hydra or the FM hydra map I need to reset mine. I purchased a FM Hydra set up from a buddy and now my shop needs to reset the ECU cause the guy had it all messed up and I need to reset it can anyone explain how I will do this also does anyone have a basic map I can reset this with?
#6
Send me a PM with your email address and I'll get my map over to you.
*********WARNING ! DANGER WILL ROBINSON! DANGER!!***********
DISCLAIMER- I am NOT responsable if you blow your **** up. My map is for a 2002 VVT running 12psi and 93 oct. gas @ 1000ft altitude on a 2560R turbo and 550cc injectors.
No need to reset if you load up a new map.
*********WARNING ! DANGER WILL ROBINSON! DANGER!!***********
DISCLAIMER- I am NOT responsable if you blow your **** up. My map is for a 2002 VVT running 12psi and 93 oct. gas @ 1000ft altitude on a 2560R turbo and 550cc injectors.
No need to reset if you load up a new map.
#8
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
FM charges for maps beacause Jeremy doesn't want to give his work away for free. if you buy the hydra or a harness from them, they will include one free map.
it's not hard to build a map though.
it's not hard to build a map though.
#9
Sent the PM's out thx guys. I bought this set up 3rd party I understand people want to be paid but I have bought other FM parts from them I believe if this is there product they should support it. Its a map I will continue to buy their products so long as they provide good ones at a reasonable price to competition and so-forth. Skipped their Fuel rail in place of the new Corky Bell design will post pictures when we get it on. Thanks to all who have posted.
#12
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
it's more the inputs and outputs specific to the pinout of the harness that you should worry about, not the turbo and injectors.
find someone with a 99-00 car and get a map from them. then you can use the injector change trim function (tools menu) to scale your injectors.
the rest is all fine tuning as far as the map is concerned.
find someone with a 99-00 car and get a map from them. then you can use the injector change trim function (tools menu) to scale your injectors.
the rest is all fine tuning as far as the map is concerned.
#14
I have a 2001 FMII Miata with the Hydra 2.5. I am having a drivability issue around 2500 RPMs. The throttle is very uneven at that range with the idle jumping up and down a bit. The car was apparently dyno tuned before I bought it; however, it has had this issue since I bought it. Does anyone have any ideas?
Thank you,
Greg
Thank you,
Greg
#15
I have a 2001 FMII Miata with the Hydra 2.5. I am having a drivability issue around 2500 RPMs. The throttle is very uneven at that range with the idle jumping up and down a bit. The car was apparently dyno tuned before I bought it; however, it has had this issue since I bought it. Does anyone have any ideas?
Thank you,
Greg
Thank you,
Greg
Thread
Thread Starter
Forum
Replies
Last Post