goin full boost....
09-04-2006, 09:11 AM
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
goin full boost....
TODAY!
Myself and braineack are installing my kit today.. stay tuned for details/pics!
Includes:
Greddy 15g
TurboTony DP
Stripes I/C kit
One of 2 BoVs
Myself and braineack are installing my kit today.. stay tuned for details/pics!
Includes:
Greddy 15g
TurboTony DP
Stripes I/C kit
One of 2 BoVs
Reply
0
0
09-04-2006, 06:38 PM
#4
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
Wow... like 6 hours and lots of swearing later its done. Thanks in a huge part to braineack and the guy whos garage had the most outrageous airtool setup ever. Some drawbacks:
We realized my plugs and possibly my wires are shot to hell so my car isnt running very well.
Furthermore, on the ride home, my turbo was screaming like a banshee, which I am thinking is the BOV opening up prematurely (needs some tightening)
We realized my plugs and possibly my wires are shot to hell so my car isnt running very well.
Furthermore, on the ride home, my turbo was screaming like a banshee, which I am thinking is the BOV opening up prematurely (needs some tightening)
Reply
0
0
09-04-2006, 10:04 PM
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,490
Total Cats: 4,079
Install went fairly smooth. A few issues here and there that I we weren't able to work out. It's also a lot easier when the AFPR and MSD box are already hooked up. And not having to install the AFM.
I was able to install Stripe's intercooler kit today first hand and I couldn't have been more impressed with the quality, fit, and mounting bracket. Very easy and straight forward install.
Installs are a lot easier when you have an ASE certified guy's garage with every tool known to man at your disposal and an air line at every ten feet.
Brad sorry I couldn't stick around for the test drive. As long as it's not sounding like this: http://www.magnaflowonline.com/catal...load/spool.wmv
Hurry up and get some pics up homey!
I was able to install Stripe's intercooler kit today first hand and I couldn't have been more impressed with the quality, fit, and mounting bracket. Very easy and straight forward install.
Installs are a lot easier when you have an ASE certified guy's garage with every tool known to man at your disposal and an air line at every ten feet.
Brad sorry I couldn't stick around for the test drive. As long as it's not sounding like this: http://www.magnaflowonline.com/catal...load/spool.wmv
Hurry up and get some pics up homey!
Last edited by Braineack; 09-05-2006 at 08:54 AM.
Reply
0
0
Bad-*** garages.
09-04-2006, 10:42 PM
#8
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
OK ladies....here's some pics.. the FMIC pic is hard to see cause it was getting dark when I got home.. I will show some pics of it tommorrow. Teasers are here.... Scott fix the damn link. haha.
Reply
0
0
