Yet Another Gun Thread
#3601
Elite Member
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
This is going to be a huge pain, though. I got an email from BCM yesterday morning on my personal address that a component was in stock but most gun sites are blocked from my office and trying to navigate a purchase on my phone is never going to work. :(
#3602
Yah, abosolutely no reason to not mix/match. They are all built to the same specs.
That said... they aren't all built to the same tolerances and tiny variances do occur. I'd use whichever upper receiver fit the lower best (ie: no wiggle). It doesn't affect accuracy, but can annoy people.
That said... they aren't all built to the same tolerances and tiny variances do occur. I'd use whichever upper receiver fit the lower best (ie: no wiggle). It doesn't affect accuracy, but can annoy people.
#3603
Elite Member
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
Yah, abosolutely no reason to not mix/match. They are all built to the same specs.
That said... they aren't all built to the same tolerances and tiny variances do occur. I'd use whichever upper receiver fit the lower best (ie: no wiggle). It doesn't affect accuracy, but can annoy people.
That said... they aren't all built to the same tolerances and tiny variances do occur. I'd use whichever upper receiver fit the lower best (ie: no wiggle). It doesn't affect accuracy, but can annoy people.
Probably a moot point unless I pay Mark or Sam or you to camp on some sites and buy me parts.
#3605
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
You hit a point I've been meaning to ask about... I have a Smith Enterprises Armorers Wrench I purchased through Brownells a while back, and I'm less than impressed with its fitment. It absolutely does not fit the 2-3 "milspec" A2 flash hiders I've tried it on, and it wouldn't fit the receiver extension castle nut on an A2 rifle tube or a M4 tube from Bravo.
What armorers wrenchs are you guys having success with? Specific PNs would be awesome. I get super annoyed with tools that don't work right.
What armorers wrenchs are you guys having success with? Specific PNs would be awesome. I get super annoyed with tools that don't work right.
#3611
Scrappy, every site out there has a "notify me when in stock" button on all their ****. For parts, if you have a computer near you, can usually get to it in time to place an order. For ammo, forget it unless you've got a page open to the actual item, can refresh quick+add to cart+ checkout, and hope 10k other dudes aren't doing the same thing.
But for ammo... Walmart hasn't raised their prices on anything as far as I can tell. You just gotta find the one near you that is getting reliable shipments (they all should be) and be there in the morning (7-730 depending on store) when the the sporting goods dept "opens" and they stock the shelves.
On a side... just bought this: Nikon ProStaff Target EFR 3-9x40 Rifle Scope FREE S&H 6734. Nikon Rifle Scopes. It was $151 shipped after a 5% coupon and free shipping.
Optics planet currently has a regular rimfire BDC RETICLE 3-9x40 Prostaff for $119 shipped... GREAT ******* DEAL if you need a reliable rimfire scope. I wanted the extra EFR gimmick adjustment for mine, and an extra $30 seemed reasonable.
But for ammo... Walmart hasn't raised their prices on anything as far as I can tell. You just gotta find the one near you that is getting reliable shipments (they all should be) and be there in the morning (7-730 depending on store) when the the sporting goods dept "opens" and they stock the shelves.
On a side... just bought this: Nikon ProStaff Target EFR 3-9x40 Rifle Scope FREE S&H 6734. Nikon Rifle Scopes. It was $151 shipped after a 5% coupon and free shipping.
Optics planet currently has a regular rimfire BDC RETICLE 3-9x40 Prostaff for $119 shipped... GREAT ******* DEAL if you need a reliable rimfire scope. I wanted the extra EFR gimmick adjustment for mine, and an extra $30 seemed reasonable.
#3612
I'm shooting tonight... harvesting brass... always on the hunt for actual normal prices on items, they still exist. Picked up .22 from an armslist seller that was just retail price. Picking up .223 at below retail just through an ongoing purchase connection from a year ago.
Rare though to find stuff (local stores are simply empty here), and connections/luck runs dry...
Rare though to find stuff (local stores are simply empty here), and connections/luck runs dry...
#3613
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
I took 3-4 friends shooting last month, completely non-firearms people. I told them if they fed it, they could shoot it, but no one could find ammo. I brought about 3-400 rounds and they were shitting themselves on the $10-12 price tags on my boxes of .40S&W ammo. I told them it was "Pre-Obama" ammo. Honestly, they couldn't afford to pay me back at current prices for what we burned, but I made that investment in "fun" literally years ago.
I loaned my 1100 to some co-workers to do some skeet shooting this last weekend. They couldn't find ammo so I also gave them 200 rounds of 12ga and told them "to replace it" rather than "pay me for it" when they were able. I don't expect to be paid back any time soon.
I loaned my 1100 to some co-workers to do some skeet shooting this last weekend. They couldn't find ammo so I also gave them 200 rounds of 12ga and told them "to replace it" rather than "pay me for it" when they were able. I don't expect to be paid back any time soon.
#3614
Elite Member
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
Scrappy, every site out there has a "notify me when in stock" button on all their ****. For parts, if you have a computer near you, can usually get to it in time to place an order. For ammo, forget it unless you've got a page open to the actual item, can refresh quick+add to cart+ checkout, and hope 10k other dudes aren't doing the same thing.
I am pretty much down to just needing the lower parts kit, then the important upper components (barrel, BCG and probably something else I am forgetting), optics if any, then mags and ammo. "That's it."
#3616
Anyone in the market for a full USPSA Production class setup? (5" M&P Pro with upgrades and other goodies)
http://www.brianenos.com/forums/inde...owtopic=170767
http://www.brianenos.com/forums/inde...owtopic=170767
#3617
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
You didn't add the BCG and charging handle? I've got that same upper with the BFH barrel and Bravo BCG. Its a very well built machine.
I've got about $400 worth of parts backordered from DSArms that I may cancel. I called them last week and they had everything in stock from my order except the backordered LPKs. Call them at lunch today to cancel the LPKs and now they have NOTHING from my order in stock. Dammit!
I've got about $400 worth of parts backordered from DSArms that I may cancel. I called them last week and they had everything in stock from my order except the backordered LPKs. Call them at lunch today to cancel the LPKs and now they have NOTHING from my order in stock. Dammit!
Wait, WTF? DSArms is answering the phone for you?! lol...
Le sigh:
In other news... DAMMIT. Went to my local Cabela's to buy an RCBS Universal Hand primer tool cause it's cheaper retail than Midway at $63.00 after tax. Of course they didn't have one in my local store, the warehouse was out, but a store in like Nevada had 3 of them. My clerk offered to call up the Nevada store and order one shipped from the store to my house and they'll pickup shipping charges. Winning.
Well it arrived today along with my Polish Care package.
Yep. The anvil won't come up high enough to fully seat the primer, no matter what I tried. Also noticed while looking this over, there are 2 c-clips missing from the handle pin. WTF?! This doesn't seem like Cabela's fault since the package wasn't opened, neither was the little bag of misc parts until I tore it open. Guess I'm not going shooting this weekend after all.
My Aimsurplus Polish AK-M Care package arrived and I'm excited with what came, minus the copious amounts of cosmoline.
As menacing as the bayonet looks, I'm sad the blade was refinished. Bayonet, Scabbard, 4 steel magazines, magazine bandoleer, oil can, cleaning kit plug (goes in the buttstock) and a new old stock sling for $113 to my door. Awesome.
Speaking of Aimsurplus, 2 evenings ago I saw on /r/guns that Aim had authentic Russian M1944 Mosin Nagant "Carbine" rifles in stock for $199.95! Recently I was visiting some gun stores willing to pay almost that for a Chinese Type-53, kinda mad at myself for not buying one from AIM before they sold out!
#3618
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Local guy in Topeka was selling a 500 round case of TulAmmo 5.56 today for $225. Tempting, but I refuse to pay 45 cents a round for steel russian ammo especially when you consider Sportsmansguide was selling those 500 round cases for $130 a couple months ago.