nikoror

iTrader: (4)

I bought a 1990 Miata for my new track day car. So far just picked up a hardtop and started installing Sparko (fake Sparco) Evo2Plus seats in it. Picked up a spare 1.6 engine which I will hopefully build into a track-ready turbo engine.
Short term goal: GT2560
Long term goal: Sub 2min TWS

Here are some pics of the car before I decided to buy it:
https://picasaweb.google.com/1071993..._miata_pre_buy


Project name is Shades, you can ask gospeed81 where the name comes from


Here are some pics of putting the seat in and getting the engine to the shop.
https://picasaweb.google.com/1071993...8655169/May_17
https://picasaweb.google.com/1071993...8655169/May_19











I was about to put the engine on the engine stand, but the bolts I needed are M12x1.5 which my local home depot didn't have, my local lowe's didn't have, ace hardware was closed and the pep boys my gps took me to didn't exist

Also, check out www.axiom1.com for the other stuff going on in the shop. I'm getting my PhD in Mechanical Engineering (Fluid Mechanics and Fluid-Structure Interaction) and the car stuff just keeps me sane

Nik

TheBirdmanJD

iTrader: (2)

Napa was the only place near me that had them. Try there.

Bird

Braineack

iTrader: (62)

Welcome to the site nikoror, thanks for joining up!

nikoror

iTrader: (4)

Thank you, sir! Confirmed, my local Napa had exactly what I needed: M12x1.5 70mm long. Head is off, pistons still in the block. Soft top is out for good.

gospeed81

iTrader: (51)

Welcome Nik!

Good to see you on the site. Was a pleasure wrenching with you Saturday and talking about your plans. I hope to see the rebuilt motor taking some serious boost soon.

curly

iTrader: (25)

I've always used transmission bolts, obviously a difficult solution if your transmission is still in the car.

Welcome.

nikoror

iTrader: (4)

Thanks. I'll be starting a build thread soon after more parts arrive.

Pitlab77

iTrader: (3)

Welcome.

where in Houston?

nikoror

iTrader: (4)

Car is close to Bingle and I-10

DBrock

iTrader: (1)

The engine transport made me lol

nikoror

iTrader: (4)

Sometimes you just want to go for a drive: just you and the engine

Oscar

iTrader: (2)

Do yourself a favor and get a camlock harness

nikoror

iTrader: (4)

The harnesses came with the car, I have some Schroth 6-point sitting on the shelf