MEGAsquirt A place to collectively sort out this megasquirt gizmo

Dwell setting

Thread Tools
 
Search this Thread
 
Old 12-09-2010, 05:36 PM
  #1  
Newb
Thread Starter
 
cat10's Avatar
 
Join Date: Nov 2009
Location: Oxford, England
Posts: 24
Total Cats: 0
Default Dwell setting

Hi folks, please can you let me know what the Dwell Settings should be for my 1.8 mk1 1996.

Cranking Dwell,Running Dwell,Minimum discharge period (ms)

I am using a MS1 V3.

Many thanks

Last edited by cat10; 12-09-2010 at 05:51 PM.
cat10 is offline  
Old 12-09-2010, 05:48 PM
  #2  
Boost Pope
iTrader: (8)
 
Joe Perez's Avatar
 
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,023
Total Cats: 6,591
Default

A good starting point is 3.5ms running, 5ms cranking. You might need to increase the running dwell slightly if you find that you're getting misfires. Better to start small and work upwards.
Joe Perez is offline  
Old 12-09-2010, 06:00 PM
  #3  
Newb
Thread Starter
 
cat10's Avatar
 
Join Date: Nov 2009
Location: Oxford, England
Posts: 24
Total Cats: 0
Default

Hello Joe, the reason I am asking is the Diyautotune site has a 96/97 msq.for the pnp which has the cranking dwell at 8.0, Running dwell at 4.3 and the discharge period at 1.0ms

Also on the same site it has the C/D at 7.5, R/D at 4.5 little bit confused to be honest...

Does it really make alot of difference?

Thanks
cat10 is offline  
Old 12-09-2010, 06:22 PM
  #4  
Boost Pope
iTrader: (8)
 
Joe Perez's Avatar
 
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,023
Total Cats: 6,591
Default

Do they?

That's interesting. I was just going off of observations which I made years ago with an oscilloscope on a running engine, though the car I was testing was a '92. I wouldn't have though the '96s coils would be that much different, at least the actual magnetics.

Dwell isn't a massively critical number to get "just right". In fact, the actual optimum setting will vary from one car to another based on the health of the electrical system, specifically the voltage available to the coils under load. In this context, the difference between 4.3 and 4.5ms running is fairly insignificant, so go ahead and try 4.3.

Likewise, the difference between 7.5 and 8.0 during cranking is nearly meaningless. Going overboard merely results in some extra heat being generated, and since the engine is only cranking for a second or two, no harm is going to be done even if you specify 10ms. So give it 8.0 and I'm sure it'll be happy.

Minimum discharge isn't really important, since you'll never spin the engine fast enough for the cycle period to approach the dwell period. This is only a factor on V8s with distributors, where one coil has to fire 8 times per cycle. With our wasted-spark ignition, each coil fires only twice per cycle, so it has plenty of off time in between dwell events.
Joe Perez is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
90 Turbo
MEGAsquirt
19
10-19-2015 03:23 PM
mx592
Suspension, Brakes, Drivetrain
1
10-01-2015 12:45 AM



Quick Reply: Dwell setting



All times are GMT -4. The time now is 03:15 PM.