What is needed to improve crank signal on 96 engine
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Birmingham, AL
Posts: 252
Total Cats: 3
What is needed to improve crank signal on 96 engine
I'm currently running MS3X on 93 miata, 96 engine, and 93 CAS. I want to run sequential fuel and improve the scatter I get in my rpm gauge at high rpms. I have done a search and it appears most people are using 99 cam and crank position setup.
From researching I thought i could use a 99 crank sensor and FM 36-2 wheel, but I am unsure what is required for the CMP signal since I don't have a 99 head. I also have the CAS from the 96 engine if it is helpful. Any input on a good setup for crank position and cam for this setup would be appreciated.
From researching I thought i could use a 99 crank sensor and FM 36-2 wheel, but I am unsure what is required for the CMP signal since I don't have a 99 head. I also have the CAS from the 96 engine if it is helpful. Any input on a good setup for crank position and cam for this setup would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM
AlwaysBroken
Engine Performance
4
09-04-2015 01:35 PM