soloracer

iTrader: (10)

So when I upgrade my MS, does it make sense to mod my parallel harness to be a standalone for the MS3, or should I just get a new one? Any market for parallel harnesses?

What I'm after is the least amount of work. Convert or replace?

Braineack

iTrader: (62)

unplug the stock computer, add the idle out wire, and volia you have a standalone harness.

soloracer

iTrader: (10)

You're kidding. That's all there is to it? I'm going to have to move crap around though, right? I think I'm going to forgo the expander for now in the interest of getting started on this for less cash.

Braineack

iTrader: (62)

Why would you need to move things around? On the db37(s) side, sure a few wires here and there if you add the expander, but why would the part plugs into the oem harness need to change?

soloracer

iTrader: (10)

OK, makes sense. This might be easier than I thought! Thanks, Scott

Braineack

iTrader: (62)

when I first went MS3, from MS2, I simply swapped the case and CPU, loaded the same tune and it started right up and off I went. The biggest change will be adding in all the extra features the the MS3 offers...such as a./c idle up, the idle duty tables, the 4x4 idle ve table, etc. etc.

soloracer

iTrader: (10)

Well, I'm coming from MS1. I imagine I get to re-tune. This is fine though since I wasn't happy with my tune anyhow.