Mistakenly bought a MS DIY kit right before they redid the website. In over my head.
#1
Mistakenly bought a MS DIY kit right before they redid the website. In over my head.
A while back I ordered the MS DIY kit, the MS1 extra 3.0 PCB as per the instructions in this thread
https://www.miataturbo.net/useful-sa...asquirt-13676/
Then about a week later Megsquirt redid their website and all the links and instructions broke and a banner appeared calling the instructions "VERY OLD AND OUTDATED" which complicated things quite a bit. I messed up here, I should have noticed how old the instructions were beforehand.
I found these instructions on the new website. If I follow these instructions how close will it get me? MS-Extra V3.0 Build Manual I also bought the options for boost control, relay control for the fans, and the PWM IAC valve control.
I realize I really fucked up here but at the time I bought it the instructions were all there picture by picture and I believed I could get it done but now I just don't want to have wasted $300 and be forced to pay $700 for a full kit that's not as powerful as the one I could have build myself.
I found a friend who does this kind of stuff all the time who offered to help me so I have the ability now I just need to find a good set of instructions.
https://www.miataturbo.net/useful-sa...asquirt-13676/
Then about a week later Megsquirt redid their website and all the links and instructions broke and a banner appeared calling the instructions "VERY OLD AND OUTDATED" which complicated things quite a bit. I messed up here, I should have noticed how old the instructions were beforehand.
I found these instructions on the new website. If I follow these instructions how close will it get me? MS-Extra V3.0 Build Manual I also bought the options for boost control, relay control for the fans, and the PWM IAC valve control.
I realize I really fucked up here but at the time I bought it the instructions were all there picture by picture and I believed I could get it done but now I just don't want to have wasted $300 and be forced to pay $700 for a full kit that's not as powerful as the one I could have build myself.
I found a friend who does this kind of stuff all the time who offered to help me so I have the ability now I just need to find a good set of instructions.
#2
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
I added that red banner on the top of my write-up in August of 2014.
That's my content that I wrote in 2007, it has no affiliation with "Megasquirt" and "their website". those images were hosted on my own personal website: boostedmiata.com that I stopped paying for in like 2012.
I would work with DIYAUTOTUNE to return your order and instead purchase a MS3 v3.0 kit + MS Expander board
and then follow these documents for assembly: 90 ? 97 MS3 | Frank's Westfield MX5 90 ? 97 MS3 |
There's other options for the harness that's less "hacky". I still like a regular patch harness that doesnt require any cutting/modifying and hair-pulling when trying to run ~40 wires inside such a tight space.
That's my content that I wrote in 2007, it has no affiliation with "Megasquirt" and "their website". those images were hosted on my own personal website: boostedmiata.com that I stopped paying for in like 2012.
I would work with DIYAUTOTUNE to return your order and instead purchase a MS3 v3.0 kit + MS Expander board
and then follow these documents for assembly: 90 ? 97 MS3 | Frank's Westfield MX5 90 ? 97 MS3 |
There's other options for the harness that's less "hacky". I still like a regular patch harness that doesnt require any cutting/modifying and hair-pulling when trying to run ~40 wires inside such a tight space.
Thread
Thread Starter
Forum
Replies
Last Post
EvilChap
General Miata Chat
5
03-17-2016 04:14 AM