AngryMcMuffin

Hey all,

First post here, been running on Megasquirt in my 96 for a while now. Car runs well, but I've been wanting to sort out my launch control and such.
I called DIYAutotune and they said with the v1.0 board I'd have to put a jumper between pins 10 and 11 on the unused 12 pin port on the main header for launch control. Main problem is I can't find a pinout for that 12 pin port, it's no big deal if I knew which pins were 10 and 11, I just don't want to fry my ECU by guessing.
I'm really just trying to not use the options port for this, which I know would be easier. If anyone has done this or has experience of other quirks with the older boards, I'd love any info I can get.

Right now my car is a stock 1996 1.8 with a header and a 2.5 inch exhaust. I have everything sitting and waiting to go turbo, just haven't had the time and space to do it all yet. And wanted to get the learning curve of tuning in general out of the way because I added fuel pump, big injectors, and boost into the mix.

Thank you all in advance for the help!

The car starts, runs, and drives almost like stock. Just with a little more throttle response. But It's let me break into the world of tuning my own car, with assistance from a friend when I have questions.

AngryMcMuffin

Ended up running this to the options port by pulling a wire straight from the stock clutch switch. And a wire from that switch to the ground. So I avoided cutting the factory harness for the car.