No Power- Does Not Turn On - Braineack PnP
01-27-2008, 11:00 PM
#1
Elite Member
Thread Starter
iTrader: (17)
Join Date: May 2007
Location: NY
Posts: 1,615
Total Cats: 2
No Power- Does Not Turn On - Braineack PnP
Just installed Braineack's MS PnP on my 95. MS does NOT come on.
Have it plugged inline with the stock ECU but the lights on the MS are NOT coming on.
Megatune does NOT recognize the MS.
Seems like the MS is not getting power.
- Anyone have contact information for Braineack? Phone #?
- Any suggestions?
Thanks!
Have it plugged inline with the stock ECU but the lights on the MS are NOT coming on.
Megatune does NOT recognize the MS.
Seems like the MS is not getting power.
- Anyone have contact information for Braineack? Phone #?
- Any suggestions?
Thanks!
Reply
0
0
01-27-2008, 11:30 PM
#6
You can check if the MS works with a 9 volt battery. Pin 28 is + and 19 is negative. See if it powers on. If it does, then its the boomslang.
Get a digital multimeter and check pin 28 on the female end of the DB9 with the car turned to on. If you get +12 then you have power, if not then its the boomslang.
He used the boomslang that braineak included, there is no wiring. Just plug and play.
Reply
0
0
01-29-2008, 09:04 AM
#12
Hey just want to say it was great meeting everyone on Sunday. I had alot of fun.
Shane, Joseph which one of you is next? Once you two are FI there will be 7 of us down here with FI Miatas.
Hey Tony, any news?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Shane, Joseph which one of you is next? Once you two are FI there will be 7 of us down here with FI Miatas.
Hey Tony, any news?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Reply
0
0
01-29-2008, 11:57 PM
#14
Elite Member
Thread Starter
iTrader: (17)
Join Date: May 2007
Location: NY
Posts: 1,615
Total Cats: 2
still no power guys...did the jumpers, any other ideas?
haz I had a thread going on in the bs section....check it out and u'll get filled in...where u by? im in cutler bay
haz I had a thread going on in the bs section....check it out and u'll get filled in...where u by? im in cutler bay
Reply
0
0
01-30-2008, 02:16 AM
#15
We're not that close.
You can check if the MS works with a 9 volt battery. Pin 28 is + and 19 is negative. See if it powers on. If it does, then its the boomslang.
Get a digital multimeter and check pin 28 on the female end of the DB9 with the car turned to on. If you get +12 then you have power, if not then its the boomslang.
He used the boomslang that braineak included, there is no wiring. Just plug and play.
You can check if the MS works with a 9 volt battery. Pin 28 is + and 19 is negative. See if it powers on. If it does, then its the boomslang.
Get a digital multimeter and check pin 28 on the female end of the DB9 with the car turned to on. If you get +12 then you have power, if not then its the boomslang.
He used the boomslang that braineak included, there is no wiring. Just plug and play.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
