I think it's fubar
02-22-2009, 09:29 AM
#1
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Belgium
Posts: 999
Total Cats: 73
I think it's fubar
MS2Etra was working fine (on the jimstim) before but after connecting the extra inputs, it isn't working any more.
With jim plugged in, FP on the jim lights up, as do all 3 leds on the MS.
Serial connection isn't working.
Is there a way to test the daughterboard? I'm thinking I might have fried/shorted it when soldering the wire for pe1 (DIP40 pin 15 to JP4).
With jim plugged in, FP on the jim lights up, as do all 3 leds on the MS.
Serial connection isn't working.
Is there a way to test the daughterboard? I'm thinking I might have fried/shorted it when soldering the wire for pe1 (DIP40 pin 15 to JP4).
Reply
0
0
05-03-2009, 10:54 AM
#4
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Belgium
Posts: 999
Total Cats: 73
Turns out I had indeed fried the daughterboard when soldering the wire for pe1. Plugged in a new one and all is well 
(except for no RPM reading)
(except for no RPM reading)
Last edited by WestfieldMX5; 05-03-2009 at 11:08 AM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
mgeoffriau
Insert BS here
13
04-20-2014 09:04 AM
sixshooter
Miata parts for sale/trade
24
01-27-2011 01:20 PM
