All MS users, chime in!
#88
That MS box ended up on a roommate's Fiat that I'm doing MSnSE+EDIS. I actually bought a VEMS box super cheap with a BF/BG GTX harness. I got some Camry v6 COPs, DSM 450s, and the resistor box a few weeks ago. Should be nice to have wideband current pump onboard, EGT onboard, and a LCD and keyboard input. Now if I can only understand their Wiki's Hungarian-Engrish.
#96
Senior Member
iTrader: (14)
Join Date: Aug 2008
Location: Tinley Park, IL
Posts: 1,482
Total Cats: 0
Finally installed!!! Awesome... just...awesome!
MS1 v3.0, HR10g, home built standalone, 460cc inj., improved spark drivers, launch control, 1.6L auto TB, no AFM, NB O2(for now).
Toyota COPs on standby.
I had a few minor firmware issues at first, but the third flash worked. She has a pretty solid idle @ 850 RPM, open or closed loop, good cranking, ASEs and AEs. Idle and cruise bins are pretty close but I'm leaving the boost bins super rich until I get a wideband. Fuel and spark are fairly conservative to keep it safe.
I've been driving it to work for almost 2 weeks now! IT'S SWEET!!!
A big Thank You to all the guys who blazed a path for all to follow! I've rode a lot of coat tails to get to this point and it's definitely appreciated.
A special thanks to Joe Perez, Braineack and cjernigan for awesome write-ups to get us going and DIY Autotune for a great kit!!!
MS1 v3.0, HR10g, home built standalone, 460cc inj., improved spark drivers, launch control, 1.6L auto TB, no AFM, NB O2(for now).
Toyota COPs on standby.
I had a few minor firmware issues at first, but the third flash worked. She has a pretty solid idle @ 850 RPM, open or closed loop, good cranking, ASEs and AEs. Idle and cruise bins are pretty close but I'm leaving the boost bins super rich until I get a wideband. Fuel and spark are fairly conservative to keep it safe.
I've been driving it to work for almost 2 weeks now! IT'S SWEET!!!
A big Thank You to all the guys who blazed a path for all to follow! I've rode a lot of coat tails to get to this point and it's definitely appreciated.
A special thanks to Joe Perez, Braineack and cjernigan for awesome write-ups to get us going and DIY Autotune for a great kit!!!
Last edited by lordrigamus; 06-14-2009 at 07:12 PM. Reason: updated
#100
1994 BEGI S, 2560, MSPNP, LC1, Knocksense, RX7 460, E-Bay 11x12 IC. AFM delete. Have been running MS for about two weeks with great success. Thanks to Joe Perez, Braineack, and the rest of the players on this forum, and also DIY Autotune for being free with the helpful info and speeding up the learning curve.