Building 2004 msm boomslang
#1
Building 2004 msm boomslang
Okay, so I made a stupid assumption concerning the pinouts and required parts for the boomslang (mainly, that it use the same connectors as the 2001). Given that this is my harness pinout diagram (I'm still mapping connections), how do I figure out what connectors I need?
#7
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
Of course there's a hard way. Build a plastic injection-molding machine from scratch and create the mating connectors yourself, cutting the pins out of flat copper stock and electroplating them using a battery made from dissimilar metal rods stuck into a potato.
On the slightly less hard side, you could dismantle your ECU and remove the connectors from the circuit board. Or purchase an ECU from a junkyard car and do the same.
Or, if you want to go a bit harder than that, you could spend several hours lying upside down with your head under the dashboard and your spine being annihilated by the hump on the floor (or leave the seat in, to make it even harder), cutting and splicing individual wires to join the MS's wiring directly to the vehicle's wiring. If that's not hard enough, drizzle fresh honey over your ********* prior to getting under the dashboard, and arrange for your neighbor to periodically introduce poisonous insects into your car as you work.
On the slightly less hard side, you could dismantle your ECU and remove the connectors from the circuit board. Or purchase an ECU from a junkyard car and do the same.
Or, if you want to go a bit harder than that, you could spend several hours lying upside down with your head under the dashboard and your spine being annihilated by the hump on the floor (or leave the seat in, to make it even harder), cutting and splicing individual wires to join the MS's wiring directly to the vehicle's wiring. If that's not hard enough, drizzle fresh honey over your ********* prior to getting under the dashboard, and arrange for your neighbor to periodically introduce poisonous insects into your car as you work.
Thread
Thread Starter
Forum
Replies
Last Post