wrench98

Hello everyone.
I am a noob having some trouble with a MS3X install.
Background on the car.
94 Miata
2002 VVT engine
RC 440 injectors
MP62 Supercharger
DIY Autotune assembled MS3X

Engine cranks over and tries to start but will not.
The composite logs I have looked at searching this site and others doesn't exactly look like mine.

Using the cam and crank sensors from the 02 engine wired into the original cam and crank sensor signal return wires.

All the wiring was done by me. And has all been double checked.

Any help would be greatly appreciated.

Braineack

iTrader: (62)

sync looks good. all in fuel tuning at this point.

wrench98

Thank you sir.

wrench98

Well after too many days trying different fueling strategies I finally got it running.
Set the Ignition input capture to falling edge rather than rising edge and it fired right up!
Now I can finally get to tuning.