messinatyler

I've got my car running, but it is hard to start up. To get it started I have to cut the fuel pressure back to 20lbs, once started i move it back to 40lbs and it idles great. After warmup when I go into boost, around 7psi it get really rich around 10afr give or take and sputters(I'm wanting to run 12lbs of boost). Also my aem wideband guage readout is fine, but the one on my megatune is showing up around 2-3afr. I know that it is wired up right, I was just wondering if i need to change some settings in megatune. Finally, my megasquirt shows the temp in the yellow at 210 is that right, or do i need to make some adjustments.

hustler

iTrader: (6)

Yes, you need to change some settings in megatune. Take fuel out of ASE and alwarm-up, then adjust enrichment. This **** is not hard, you can do it. We believe in you.

messinatyler

Ok, I am new to this. I am not exactly sure how to do that, can you pm me or somthing?

DMRider_10

Search on here for:

warmup enrichments
after start enrichments (ase)

Braineack

iTrader: (62)

larger injectors + your current cranking table = "To get it started I have to cut the fuel pressure back to 20lbs, once started i move it back to 40lbs and it idles great"

larger injectors + your untuned fuel table = "when I go into boost, around 7psi it get really rich around 10afr give or take and sputters"