Battery Voltage Correction (How to set?)
04-20-2007, 02:10 PM
#1
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Battery Voltage Correction (How to set?)
So I've looked and read and found nothing on how I should set my battery voltage correction value.
Do i just bring up a voltage gauge in MS and then adjust the value to what my multimeter reads at the battery or is there something I missed in all the manuals I've read?
Do i just bring up a voltage gauge in MS and then adjust the value to what my multimeter reads at the battery or is there something I missed in all the manuals I've read?
Reply
0
0
04-20-2007, 02:22 PM
#2
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
I found this:
Battery Voltage Correction (ms/V) (BatFac) is the number of milliseconds that MegaSquirt-II adds to each fuel injection pulse to compensate for the slower opening of the injectors with lower supply voltages. Generally 0.10 ms/V or 0.2 ms/V is about right.
It appears everything I can find says .1 ms/V is fine. Anyone else running something different than that?
Battery Voltage Correction (ms/V) (BatFac) is the number of milliseconds that MegaSquirt-II adds to each fuel injection pulse to compensate for the slower opening of the injectors with lower supply voltages. Generally 0.10 ms/V or 0.2 ms/V is about right.
It appears everything I can find says .1 ms/V is fine. Anyone else running something different than that?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
