Anyone near Buffalo NY who understands megasquirt?
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2013
Location: Arcade, New York
Posts: 157
Total Cats: -1
Anyone near Buffalo NY who understands megasquirt?
Looking for someone, anyone who knows megasquirts. I installed a diypnp into my 91 1.6. The soldering was the easiest part. Got it built and flashed and loaded a NA tune with stock injectors. It cranks but no start. I made a few changes. I added denso cop as per the build thread on here. I added tps, iat and coolant temp sensors. I also deleted the iac as I only run the car in warm summer months. It shows all sensors are working and reading in megastudio and shows my rpms while cranking.
I hear the fuel pump run when the key is forward but no start. I am kinda screwed even if I get it running. Should have thought this one out. There is no one with in 100 mile radius who will touch it to tune it. Local shops 45mins away won't tune megasquirt. Not sure where to go to tune my turbo setup anyways if and when I ever get that far. I believe the megasquirt products are great tools in the right hands but apparently not mine. I am a mechanic not a computer tech. So anyone who is near or somewhat near looking to help out I would appreciate it.
I hear the fuel pump run when the key is forward but no start. I am kinda screwed even if I get it running. Should have thought this one out. There is no one with in 100 mile radius who will touch it to tune it. Local shops 45mins away won't tune megasquirt. Not sure where to go to tune my turbo setup anyways if and when I ever get that far. I believe the megasquirt products are great tools in the right hands but apparently not mine. I am a mechanic not a computer tech. So anyone who is near or somewhat near looking to help out I would appreciate it.
#3
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2013
Location: Arcade, New York
Posts: 157
Total Cats: -1
The afm is gone. I have the iat in place. I have the fuel pump activated through the diypnp as per the directions. I hear it power on when I cycle the key forward so I know it's powering on. Not sure if it makes a difference but I installed a 190hp walbro prior to the diypnp build but it ran great before.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM