messinatyler

I have a 1990 Miata 1.6L with a greddy turbo kit. I have 440cc injectors with the resistor packs, cat back exhaust, test pipe, AEM wideband and a mega squirt running latest firmware. I am wanting to push 11-12psi and I need to get a tune close to the equipment I am using so I can get it running well enough to drive so I can tune it myself. Any help would be great.

Thanks, Tyler

x8mrxjohn8x

iTrader: (1)

bump, i will be running the almost similar setup.

Jeff_Ciesielski

iTrader: (10)

Step 1. Download the diypnp map for a 1.6 w/ no AFM.
Step 2. Upload those maps, make appropriate changes to req_fuel, ignition timing, accel enrichment, etc.
Step 3. ?
Step 4. Tune and profit.

Full_Tilt_Boogie

iTrader: (1)

you cant transfer a 'tune' and expect it to work, thats a good way to blow **** up.
What you need is a basemap, which is an overly conservative tune that will work on lots of different setups and cars with suffering performance. Once you hae your car running like that then you get a real 'tune', which is going to be specific to your car.

You could take two 90 miatas running the Greddy kit, the only difference between them being the exhaust or the intercooler, and the tunes can be dramatically different