1.8 swap 1.6 harness and ecu what megasquirt do I need
05-25-2015, 02:09 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2015
Posts: 49
Total Cats: 0
1.8 swap 1.6 harness and ecu what megasquirt do I need
I have a 1990 with a 1994 1.8 swapped in I retained the 1.6 ecu and wiring harness what MSPNP do I need or would one have to be build, I have a 94-95 MSPNP gen 1 but not sure if it will work
Reply
0
0
05-27-2015, 08:49 AM
#4
Supporting Vendor
Join Date: Sep 2006
Posts: 2,332
Total Cats: 67
You'd have to swap the adapter board for one from a '90-'93 MSPNP. The MSPNP Gen 1 hardware has been discontinued, though, so this would only work if you found the parts used.
Either that, or repin the harness to '94-'95 specs.
Either that, or repin the harness to '94-'95 specs.
Reply
0
0
05-27-2015, 09:05 AM
#5
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,490
Total Cats: 4,079
<p>It would techincally work as is, but you wouldnt be able to input the TPS if you ever upgraded to a vTPS, you could never control the cooling fan which is okay because of the thermoswitch, and the fuel pump would have to be activated alternatively (like jumping in diagnostics box or keeping AFM attached).</p>
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
