Base Map For 1.8 Mk1
06-23-2010, 04:23 AM
#1
Newb
Thread Starter
Join Date: Nov 2009
Location: Oxford, England
Posts: 24
Total Cats: 0
Base Map For 1.8 Mk1
Hello folks, just finished assembly of MS1 V3 with mods for ignition, downloaded extra code firmware onto MS1 from MSEXTRA. I dont have a clue what to put in the setting boxes in Megatune.
My car is a 1.8 M1 uk spec, I will be using a GM IAT with no MAF sensor curently 8psi of boost controlled by an Emange.
Please could you help with a base map for MS1, I know using other peoples maps is very naughty but I need to start somewhere, at the moment I don,t have anything useful in the basic settings etc boxes.
Cheers
Phil.
My car is a 1.8 M1 uk spec, I will be using a GM IAT with no MAF sensor curently 8psi of boost controlled by an Emange.
Please could you help with a base map for MS1, I know using other peoples maps is very naughty but I need to start somewhere, at the moment I don,t have anything useful in the basic settings etc boxes.
Cheers
Phil.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
