Miata Turbo Forum - Boost cars, acquire cats.

MEGAsquirt A place to collectively sort out this megasquirt gizmo

Dwell - MS I vs. MS II

Thread Tools
 
Search this Thread
 
Old 09-18-2011, 02:35 PM
  #1  
Junior Member
Thread Starter
 
John151's Avatar
 
Join Date: Feb 2009
Posts: 67
Total Cats: 0
Default Dwell - MS I vs. MS II
The Dwell settings on the base map for the MSPNP9495 are 4.4, and for their DIYPNP for the 9495, the dwell is set to 3.1.

Just curious why the difference?
Attached Thumbnails Dwell - MS I vs. MS II-dwellsettings_mspnp9495.jpg   Dwell - MS I vs. MS II-moreignitionoptions_diypnp.jpg  
John151 is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 09-18-2011, 02:52 PM
  #2  
Boost Czar
iTrader: (62)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
Default
MSI wants the value at 12v -- MSII at 13.2v
Braineack is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 09-29-2011, 04:44 AM
  #3  
Newb
 
Wyman's Avatar
 
Join Date: Dec 2009
Location: SF, CA
Posts: 38
Total Cats: 0
Default
What Dwell setting should I have.
I'm running MSII with Toyota COPs PNP kit.
"dwell these at 3.5ms cranking, 2.5ms at 12v" That's for MSI?
"Maximum Dwell Duration" same as "running Dwell"
Thx
Wyman is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 09-29-2011, 08:32 AM
  #4  
Boost Czar
iTrader: (62)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
Default
Well you'll first go into the dwell battery correction table and do this:

See post here:
https://www.miataturbo.net/showpost....75&postcount=8



and then you'll make the max dwell duration 2.2ms, cranking can stay around 5ms.
Braineack is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 09-29-2011, 01:14 PM
  #5  
Newb
 
Wyman's Avatar
 
Join Date: Dec 2009
Location: SF, CA
Posts: 38
Total Cats: 0
Default
Thanks again.
I will do it tonight.
Wyman is offline  
Reply
Leave a poscat 0 Leave a negcat
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dwell reducer circuit for toyota COPs
JasonC SBB
DIY Turbo Discussion
92
08-01-2018 12:17 PM
Dwelling upon the ignition (pun intended)
Joe Perez
MEGAsquirt
4
12-13-2007 05:01 PM
Dwell Settings
supersuk
MEGAsquirt
2
11-30-2007 12:15 AM
dwell settings for coil on plug retrofit
Ben
MEGAsquirt
1
09-26-2007 10:56 AM
Back to Subforum
MEGAsquirt
View Next Unread
Help with Map and Baro settings (TunerStudio with MS1v3 on hr11d firmware)?




Advanced Search
Quick Reply: Dwell - MS I vs. MS II


Reply Closed Thread Share

All times are GMT -4. The time now is 10:42 AM.