Ignition problem
#1
Ignition problem
I have built a MSIIe from scratch and have had it running on my Miata -90 for some time now. I'm running almost stand alone, OEM computer only control idle everything else by MS
I have made some modifications, I'm running optoinsulators for both CAS signals, and I use Joe P:s inverted output circuit for the ignitors. It have been running perfectly for several months but now I get a non wanted ignition when turning key. It only occurs when the car have been standing still for an hour or so. Some times the car run really bad after start up. I guess it run on two cylinders only. After a while the car run on all cylinders like normal! Hot starts are no problem.
I really need some help to solve this problem! I hate the sound and running on 2 cylinders can't be good for the car.
Thanks in advance!
//Lars
I have made some modifications, I'm running optoinsulators for both CAS signals, and I use Joe P:s inverted output circuit for the ignitors. It have been running perfectly for several months but now I get a non wanted ignition when turning key. It only occurs when the car have been standing still for an hour or so. Some times the car run really bad after start up. I guess it run on two cylinders only. After a while the car run on all cylinders like normal! Hot starts are no problem.
I really need some help to solve this problem! I hate the sound and running on 2 cylinders can't be good for the car.
Thanks in advance!
//Lars
Last edited by MiatainSweden; 06-14-2013 at 12:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM