Info/instructions for Wells TPS201 TPS ** PICTURES!
#24
Since you guys have been messing around with this lately, I've got a question for you. I picked up a TPS201 last night from Autozone, but I don't think it was the right part. The box it came it clearly said Wells TPS201, but the hole was about a 1mm to big in diameter. There were two ears inside the hole where some shaft might engage, but certainly not a Miata TB shaft.
Am I correct in thinking that without modification the TPS201 shouldn't fit on the TB shaft?
Am I correct in thinking that without modification the TPS201 shouldn't fit on the TB shaft?
#25
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
https://www.miataturbo.net/forum/sho...97&postcount=4
#26
Thanks for the Braineak. That really helped. I'm well aware of that FAQ/Post and I know how to search/not be a n00b.
The part that autozone gave me didn't really have anything that I would have been able to file down. Is there another piece that might have fallen out of the box, that slides in to the TPS to grip the TB shaft? Do you guys think the wrong part was in the box?
The part that autozone gave me didn't really have anything that I would have been able to file down. Is there another piece that might have fallen out of the box, that slides in to the TPS to grip the TB shaft? Do you guys think the wrong part was in the box?
#30
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
I have a feeling it's this. but the colors of the wires are wrong and i cant see the keyway....
:(
http://cgi.ebay.com/ebaymotors/_Car-...=1218722967168
:(
http://cgi.ebay.com/ebaymotors/_Car-...=1218722967168
#31
Elite Member
Thread Starter
iTrader: (12)
Join Date: Jan 2007
Location: Hermosa Beach, CA
Posts: 2,573
Total Cats: 12
That would cost more than I paid at autozone anyway.
I have a feeling it's this. but the colors of the wires are wrong and i cant see the keyway....
:(
http://cgi.ebay.com/ebaymotors/_Car-...=1218722967168
:(
http://cgi.ebay.com/ebaymotors/_Car-...=1218722967168
#32
I just wanted to share my pictures. Not sure what model TPS is it as it was pocketed. No markings on it.
I also wanted to share Ben's original writeup, for those who don't know:
Miata Turbo Forum - Home of the turbo Mazda Miata. - View Single Post - Mspnp Faq
I also wanted to share Ben's original writeup, for those who don't know:
Miata Turbo Forum - Home of the turbo Mazda Miata. - View Single Post - Mspnp Faq
I am using a Wells TPS 201 as above using the stock TPS meatal base and the connector on the base plate.
I can solder the black orange and green wires to the connector on the stock PTS base plate but don't know what goes where ( ? )
Are the above locations for a stock 1.6 N/A wiring ?
#40
Great idea! Now, it works at idle but not when I start the car.
I
I fetched the numbers with the switch in acc position, saved it then I stated the car.
Did I wire something wrong ?
another thing is that I had to dissable closed loop idle control because the idle was bouncing up down like crazy... could this be related ?
Thanks