Ms2e 99-00 ac control
09-13-2015, 12:45 PM
#1
Newb
Thread Starter
Join Date: Jun 2014
Posts: 43
Total Cats: -32
Ms2e 99-00 ac control
I got my car to run and drive fine buy the only problem is the ac doesn't work, if I go in the ac control and select idel up pin, I'm not sure what input to chose. When I press the ac button it lights up but nothing happens. Any help would be nice as I daily drive this car in florida .
Reply
0
0
09-15-2015, 01:53 AM
#12
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,976
Total Cats: 355
This is one of the oldest units out there.
The A/C control does not go through the ECU, so the firmware is irrelevant.
The control board looks at the RPM and TPS signal to actually activate the A/C once your press the A/C button.
The first question though is, does it see the A/C button? Is there enough refrigerant in the system?
The A/C control does not go through the ECU, so the firmware is irrelevant.
The control board looks at the RPM and TPS signal to actually activate the A/C once your press the A/C button.
The first question though is, does it see the A/C button? Is there enough refrigerant in the system?
Reply
0
0
09-15-2015, 06:24 AM
#13
Newb
Thread Starter
Join Date: Jun 2014
Posts: 43
Total Cats: -32
This is one of the oldest units out there.
The A/C control does not go through the ECU, so the firmware is irrelevant.
The control board looks at the RPM and TPS signal to actually activate the A/C once your press the A/C button.
The first question though is, does it see the A/C button? Is there enough refrigerant in the system?
The A/C control does not go through the ECU, so the firmware is irrelevant.
The control board looks at the RPM and TPS signal to actually activate the A/C once your press the A/C button.
The first question though is, does it see the A/C button? Is there enough refrigerant in the system?
Last edited by Dobzeh; 09-15-2015 at 06:38 AM.
Reply
0
0
