CEL / Misfire
#1
CEL / Misfire
I keep getting CEL blinking which supposedly means misfire? Usually it goes away if engine is warm and I restart. So I believe it's related to start up. Car is stock 2000 1.6, only mods are MS3 mini and wideband. Is it MS that controls the CEL? and if it really is an misfire, can I diagnose it in tunerstudio? Should I be able to read some code when light is blinking?
With stock ECU I don't get the CEL light.
With stock ECU I don't get the CEL light.
Last edited by salamiata; 06-07-2021 at 12:32 PM.
#5
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 856
Rev uses Nitrous 1 for CEL
For a test, try changing from Solid to Flash and see what code it gives.
Does seem strange when you have all checks off.
Then again, if you have all checks off, you may as well turn off CEL altogether.
For a test, try changing from Solid to Flash and see what code it gives.
Does seem strange when you have all checks off.
Then again, if you have all checks off, you may as well turn off CEL altogether.
#9
I always thought that the symbol in car was wrench, not the key That's why I assumed that it was CEL. Maybe I should admit that It is time to get glasses... So it's the immobilizer light and now that Iäm on right path I could find threads that aligns with my situation:
https://www.miataturbo.net/megasquir...er-99-a-27412/
Thanks for your help!
https://www.miataturbo.net/megasquir...er-99-a-27412/
Thanks for your help!
#11
I always thought that the symbol in car was wrench, not the key That's why I assumed that it was CEL. Maybe I should admit that It is time to get glasses... So it's the immobilizer light and now that Iäm on right path I could find threads that aligns with my situation:
Thanks for your help!
Thanks for your help!
Thread
Thread Starter
Forum
Replies
Last Post