MS3...I have some tuning questions...
11-21-2013, 12:28 PM
#1
Elite Member
Thread Starter
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
MS3...I have some tuning questions...
Does MS3 allow on the fly boost or map switching should it be hooked up to a momentary switch that could be pressed when the ECU is already running?
Thought: push to pass button on my race build so i dont have to have the engine running 10/10ths all of the time but I can bring it up to that if there is someone being a dick infront of me.
Thought: push to pass button on my race build so i dont have to have the engine running 10/10ths all of the time but I can bring it up to that if there is someone being a dick infront of me.
Last edited by shlammed; 11-27-2013 at 03:05 PM. Reason: Title Change- More MS3 questions...
Reply
0
0
11-21-2013, 02:23 PM
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,490
Total Cats: 4,079
i dont have the screen in front of me, but you have a bunch on parameters you can switch different things from with a simple switch to ground.
I did boost switching outside the MS, just put a toggle switch on the EBC ground. I could switch between wastegate (10psi) to 15psi using the MS to control the solenoid.
I did boost switching outside the MS, just put a toggle switch on the EBC ground. I could switch between wastegate (10psi) to 15psi using the MS to control the solenoid.
Reply
0
0
11-21-2013, 04:21 PM
#5
Supporting Vendor
Join Date: Sep 2006
Posts: 2,332
Total Cats: 67
Check out the table switching and blending notes in the manual:
Megasquirt-3 MS3 Table switching, blending and dual table
Megasquirt-3 MS3 Table switching, blending and dual table
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
