redboost

well i had realized that I should have set base timing before doing anything (thankyou braineak) now i am trying to set the timing but every time i start the car to do it, there is tons of smoke from the exhaust that distinctively smells like fuel. I cant stand it and neither can my neighbors, can anyone tell me what is going on. i believe the engine was flooded with fuel before because i had to floor the pedal to get started. But why hasnt the smoke already burned out, I had it started three times now. Please help

Braineack

iTrader: (62)

did you run the MAP sensor line to the MS?

redboost

Yes map line is on

Braineack

iTrader: (62)

what basemap are you using? what sized injectors? whats your req_fuel set to?

redboost

I used the base map supplied by ms but use their instructions on changing the req fuel to support the 550 cc injectors

Braineack

iTrader: (62)

so its closer to 5?

18psi

iTrader: (76)

check for vacuum leaks too. I had a miata do that to me when starting up on MS, practically poured fuel out the tailpipe. Turned out to be a disconnected vacuum line on the mani

redboost

No I think it said 6.3 I'm not by the car at work but after I cahnged the inputs for req fuel it changed to 6.3

redboost

Actually come to think of it the vacuum line of the charcoal canister to the intake manifold was cut I must of hit it at some point it just happend yesterday but I have not fixed it yet could that be it

hornetball

iTrader: (4)

Could be. Simple to check. Plug it. Let us know because I'm curious as to whether those ports are relatively independent or closely coupled in sensing MAP.