Small Megasquirt Problem
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Land down Under
Posts: 72
Total Cats: 0
Small Megasquirt Problem
hi all, well i finaly modded my megasquirt 2.2 with help from a few kind gents here, and built my Jimstim to test the squirt, i followed the instructions in brains thread on how to program it with MS/Extra hr_10g all went well after a few trys lol but when it comes to the spark setting, thats where the problems starts i don't have it in my Megatune, am i missing something here
i have attached a pic of the megatune running as you can see there is no spark tab. Maybe someone here can enlighten me on what i may have none wrong or not done.
Cheers
Dr.
i have attached a pic of the megatune running as you can see there is no spark tab. Maybe someone here can enlighten me on what i may have none wrong or not done.
Cheers
Dr.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Land down Under
Posts: 72
Total Cats: 0
ok i got the spark tab to work when i went to codebase and outputs functions and changed the Distributor setting to MSnS, but when i recycled the megasquirt it stop working and got a error in the bottom tab's, hmm i think i need to do some more reading about the settings
Dr.
Dr.
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Land down Under
Posts: 72
Total Cats: 0
Braineack
Yes mate its bog stock at the moment,i must point out i am bench testing this with the jimstim, and the error i am getting is related to the Fuel pump, and yes i think i do need a base map for this, as this is a very big learning curve for me, but so far it has been one of the most enjoyable learning curves thanks to you guys.
My motor is a 1989 1.6 litre stock as a rock all i need is time and money to make it better
Cheers
Dr.
Yes mate its bog stock at the moment,i must point out i am bench testing this with the jimstim, and the error i am getting is related to the Fuel pump, and yes i think i do need a base map for this, as this is a very big learning curve for me, but so far it has been one of the most enjoyable learning curves thanks to you guys.
My motor is a 1989 1.6 litre stock as a rock all i need is time and money to make it better
Cheers
Dr.
Last edited by drbogg; 06-12-2009 at 10:09 PM.
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Land down Under
Posts: 72
Total Cats: 0
ok loaded up a base map found on this forum, and all is working and seems to be fine in bench testing, so now its just matter of getting it installed when i get the motor in the car and do some tuning. Oh its so much fun fun fun lol. Thanks all for the hints and help.
Plus all i can say is thank God for miataturbo.net i would be screwed if it was not for you guys.
Cheers
Dr.
Plus all i can say is thank God for miataturbo.net i would be screwed if it was not for you guys.
Cheers
Dr.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM