Can someone look at my .msq file?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 323
Total Cats: 2
Can someone look at my .msq file?
I went from a M45 with 305cc injectors to a MP62 ported by Track Dog Racing and with RC 550cc injectors.
I got a basemap from TDR but it's not working right. Car idles rough with AFR of about 10.5:1. So I'm using my old tune and just copied and pasted his AFR, Fuel, and Timing maps. I changed the fuel requirement from 13 to 5.8.
I don't know what to put in for dead time so I left it at 1.000.
Anything else I should change before I try it on my car?
How does my dwells look?
My "general settings" and "sequential injection" also looks different from TDR's.
My tune was initially created by a Honda guy so I'm not too sure about his work.
I got a basemap from TDR but it's not working right. Car idles rough with AFR of about 10.5:1. So I'm using my old tune and just copied and pasted his AFR, Fuel, and Timing maps. I changed the fuel requirement from 13 to 5.8.
I don't know what to put in for dead time so I left it at 1.000.
Anything else I should change before I try it on my car?
How does my dwells look?
My "general settings" and "sequential injection" also looks different from TDR's.
My tune was initially created by a Honda guy so I'm not too sure about his work.
#2
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 323
Total Cats: 2
The above .msq didn't work. Car cranks but doesn't fire up.
Tried using my old .msq and only changed the fuel requirement to 5.8, 6.0, 7.0.
Same thing. Cranks but does not start.
Here's my old .msq
Tried using my old .msq and only changed the fuel requirement to 5.8, 6.0, 7.0.
Same thing. Cranks but does not start.
Here's my old .msq
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 323
Total Cats: 2
Just did a search and apparently air leaks from rc 550 using the stock seals are a common problem. Since the pintle is a different size.
Napa p/n 2-12076 should fix the problem.
Napa p/n 2-12076 should fix the problem.
Thread
Thread Starter
Forum
Replies
Last Post