TrickerZ

iTrader: (6)

I have my MS in (standalone) and everything is running, but my idle is super high (2000rpm) and I can't seem to get my PLX WBO2 to read correctly. What settings should I use if there's anyone out there that has one? I think it would be the same if not similar to the LC-1.

Basic Settings -> Exhaust Gas Settings -> EGO Sensor Type: Wide band, EGO Switch Point (v): 2.332, Ignition Events: 16, Controller Step Size: 1, Controller Authority 15, Active Above Coolant Temp (C): 65, Active Above RPM: 1100, EGO Correction Step Counter: mSec

The only other thing I did was change to PLX in the configurator. Am I missing anything or is my AFR just really lean right now? I'm using the defaults for everything provided by diyautotune.

I unplugged my IAC and idle went down to a more normal level. Is it broken, or just configured completely wrong? I just punched in what diyautotune had.

Braineack

iTrader: (62)

tune your VE fuel table.

TrickerZ

iTrader: (6)

So my PLX should be set up right with those settings? I just thought it was strange to be all the way lean on a base map. My gauge doesn't correspond to what MS says, but it's only a NB gauge. Guess I should check the grounding.

Braineack

iTrader: (62)

what does the PLX output? 10:1 - 20:1 @ 0-5v?

if not you may have to modify the .ini to make the MS match what the PLX outputs.

your last statement confuses me. does your gauge read off a NB and then the MS sees the WB signal?

TrickerZ

iTrader: (6)

The MS ini file has a setting for the LC-1 and PLX 10-20:1, it's working, my brain is just backwards. I was thinking lower number = lean and higher = rich. I guess yesterday was a longer day than I thought. I just need to tune this.

yes

As far as the IAC goes though, I guess I need to calibrate it? I basically just want to make sure the board is 100% functional before I blame it on settings. It turns on and goes to 2000rpm, then kicks off and goes down to normal after warmup, so I THINK it's working properly and just needs settings. Just want to confirm with someone in the know.

Braineack

iTrader: (62)

start maniplulating your VE fuel table, once you get it into the sweet spot, between 14.7:1-13.5:1 it will idle lower and stedy.