JDMAflac

iTrader: (1)

Im posting this for a friend (Brad "na3turbo") who mostly reads information here and doesn't have enough posts to make his own thread. Any replies will be answered ASAP and will be forwarded to my friend. I can have people to vouch for me on this forum also. Here goes:

I have decided to part out my 93' miata that i began building in preparation for lot of boost, however the time has come to sell it all off. Located in Charlotte, NC. ( i know im going to regret this)

Here Goes... (it'll only allow me 10 pictures so pm me for others. ill send them if i have them)

NOTE:THE ROLLING CHASIS WILL BE FOR SALE AS WELL BUT I DO NOT HAVE ANY PICTURES UNTIL THE WEEKEND. IF YOUR INTERESTED PM ME FOR DETAILS.

1.6L shortblock- $4500 picked up $4700 with head and all listed parts below
comes with all of the following already assembled and ready to go
-Wiseco pistons 8.5:1
-Carrillo H-beam rods
-Calico Coated OEM rod and main bearings
-ARP head and main studs/bolts
-Cometic triple layer headgasket
-Gates Racing timing belt
-New OEM oil pump
-Bill Wilners Billet Oil pump gears
-New OEM waterpump, tensioner, idler pulley
-New OEM Mazda oil filter
-New OEM gasket kit
-Powdercoated oil pan(chrome color)
-Bored .040 over and honed with a torque plate
-Decked .007
-Debured
-Balanced/blueprinted
-Polished/lightened crank
-Alternator
-Starter
-Alternator belt
-Oil pressure sensor
-Powdercoated chrome intake manifold brace
-Powdercoated chrome water outlets/inlets






1.6L Head (no valves/springs/retainers)$300obo picked up
comes with all of the following
-New Hydraulic Lash Adjusters (never installed)
-OEM cams/ gears(used)
-Valvecover powdercoated military green
-Ignition coils with NGK wires(used)
-Cam angle sensor(used)
-Intake manifold
-Powdercoated chrome water necks(both the one on the front and rear of head)
-related sensors
-throttlebody( and related parts)
-all plastic covers/bolts







NOTE: HEAD WILL BE SOLD WITH SHORT BLOCK FOR $200


Willis Machine Custom Fuel rail- $200 shipped
Made out of solid aluminum. Has threaded 3/8 ends for AN- or standard fittings. Fits 1.6L manifolds only. Powdercoated green metallic




Apexi AVC-R- $425 shipped
Best electronic boost controller i think i've ever used. installed it to use for about a week then tore the car apart. all wiring/original box/diagrams/parts included.

Flyin Miata Link ECU - $1250 shipped
Includes the following
Link keypad(not pictured)
Map sensor and wiring
knock sensor
IAC sensor
ECU and Ribbon
Instruction/tuning manuals



Walbro 255lph inline fuel pump with install kit (brand new)
-$100 shipped

OEM non molested radio surround - $80 shipped

Suspension Techniques front sway bar with new bushings/hardwre
$150 +shipping
picture comming this weekend

10 gallon aluminum fuel cell $220 shipped
features built in sump
foam
x2 8-AN fittings in sump
x2 6-AN relife fittings on top side
sorry no picture until the weekend

HKS SSQV BOV- $100 shipped~~Sold~~
authentic with purple insert

5 speed tranny, no shifter shifts smooth 105K miles
$250 picked up.

HKS Turbo Timer- $50 shipped ~~Pending~~

PM ME WITH ANY QUESTIONS. I can get pictures of all receipts.
http://s42.photobucket.com/albums/e302/Mrdriftr/ more pictures here.



-Nick

323driver

Interested in the HKS SSQV BOV. I can't send PM so send me an email at
l3shik@yahoo.ca for arrangements.

Thanks

miatamania

iTrader: (9)

just saw this on miata.net...

expensive as hell but pretty.

slutz4

iTrader: (3)

this is upsetting, I was really looking forward to seeing the car finished

greenday3437

iTrader: (2)

I'm not positive but it seems like this guy is asking way too much for his stuff, you might want to recommend he lower his price if he wants to sell quickly

JDMAflac

iTrader: (1)

All requests will be answered tomorrow.

slutz4: im a little bit disappointed also but he has something else up his sleeve.

greenday: Its actually around ball park, a bit cheaper compared to a build from FM plus he has the receipts to back them up. But by all means, the prices are OBO

JDMAflac

iTrader: (1)

BOV sold and turbo timer is pending.

na3turbo

iTrader: (1)

Thanks Nick for posting this for me.

As you guys say, the prices are listed high, but they are what you would pay if purchased through a shop(new items).

I am open to any reasonable offer on anything.

Thanks for looking,
Brad

JDMAflac

iTrader: (1)

Block NOT pending sale


Who the **** would of thought that there were scammers lurking this board Must be iluvtreunos friends

JDMAflac

iTrader: (1)

Things for sell, taking up space

na3turbo

iTrader: (1)

So prices are being reduced as to get this stuff outta here. here's the new pricing for you guys, since i've just been involved in some sort of scam with another idiot. My email is Bradss61088@gmail.com

Built Block-$3000picked up
Head and related parts-$150 prefer pickup
Link ECU- $900shipped
Apexi AVCR- $300 shipped
HKS Turbo timer- $50 shipped
Custom fuel rail- $100 shipped
Walbro fuel pump- $75shipped
Suspension Techniques Front Sway with bushings- $100shipped
OEM radio surround with buttons and eyeballs- $50 shipped
5 speed tranny, no shifter 105k miles- $200picked up
10 gallon fuel cell- $150shipped

thanks guys,
brad

magnamx-5

iTrader: (7)

sucks about the plans changing, would you sell the rods and oil pumpgears seperate maybe you might get more takers how much for the intake manifold?

na3turbo

iTrader: (1)

sorry, im not ripping the block apart. i've had a few interested buyers, and a scammer for it already so hopefully it'll sell as a whole eventually. just the intake manifold? or do you want the TB and all the other stuff to?

$40 for Intake Mani alone
$60 for Mani and TB

na3turbo

iTrader: (1)

must sell this stuff, make offers! :-D thanks!

na3turbo

iTrader: (1)

bah!
shortblock and link ecu on ebay... bid away. prices posted here will be honored to board members.
Link ECU:
http://cgi.ebay.com/ebaymotors/ws/eB...158499894&rd=1

Block:
http://cgi.ebay.com/ebaymotors/ws/eB...158503299&rd=1