Partout: Garrett, TiAL, Stance, VVT, OS Giken, 3.636...etc Quality Parts...
09-06-2011, 02:42 PM
#1
Elite Member
Thread Starter
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
Partout: Garrett, TiAL, Stance, VVT, OS Giken, 3.636...etc Quality Parts...
Parting out my car. I have been back and forth about this, but even for me to consider it means that i dont feel for the car the way i should. I am buying a 350z.
Loaded pumpkin (not seperating) $2000
OS Giken Differential, 3.636 ring and pinion. Puddymod built stage 2. includes a solid sleeve instead of a crush washer and cryo treated everything.
Stance Coilovers $1000 good condition!
AEM EMS $1000
Injector Dynamics 725's with pigtails $425
TiAL 2871R with 0.86 turbine housing used for 2 weeks, basically new. $1200
TiAL 38mm MS-V with 7psi and 10psi spring $200
Top mount turbo manifold-vband $500
Vbanded 3" exhaust with magnaflow muffler and 3" high flow cat $500
Intercooler/piping setup $200
Toyota COPS with new plugs $80
Custom power steering setup $150 (has pump to an adapter, custom lines, custom resevoir and return line)
Innovate LC-1 wideband with blue guage $200
Mishimoto Radiator $OLD!!!!!!!
Fidanza Flywheel 1.6 $250
ACT Xtreme 6 puck unsprung clutch for 1.6 $OLD!!!!!!!
Modified angle steering knuckles $OLD!!!!!!!
Hydro ebrake $OLD!!!!!!!
Bride Replica seats $800 (pair)
1.8 driveshaft and new 1 peice axles $150
OEM "Roadster" door sills $80
2002 Miata VVT engine $450 valve cover modded with -10an breather hose and milled for COPS
5 speed transmission (good working order) $200
OEM wood nardi steering wheel with hub $200
KG works rear lip spoiler $OLD!!!!!!!
ATP vband catch can $60
GM 3 bar map sensor $60 with pigtail
Xenochron boost control solinoid $40
Muteki extended lug nuts $30 color is the titanium brownish
ARP head studs $75 torqued once to check compression, engine never ran still good shape
Fenders with Japanese side markers $OLD!!!!!!!
BRG doors $60
BRG aluminum hood $60
BRG aluminum trunk $60
XXR 002 $600 15x8 et0 with Dunlop Direzza DZ101
Here are some general pics of my car.
if you want specific pics Email me please.
Matt
m.moore13@hotmail.com
Loaded pumpkin (not seperating) $2000
OS Giken Differential, 3.636 ring and pinion. Puddymod built stage 2. includes a solid sleeve instead of a crush washer and cryo treated everything.
Stance Coilovers $1000 good condition!
AEM EMS $1000
Injector Dynamics 725's with pigtails $425
TiAL 2871R with 0.86 turbine housing used for 2 weeks, basically new. $1200
TiAL 38mm MS-V with 7psi and 10psi spring $200
Top mount turbo manifold-vband $500
Vbanded 3" exhaust with magnaflow muffler and 3" high flow cat $500
Intercooler/piping setup $200
Toyota COPS with new plugs $80
Custom power steering setup $150 (has pump to an adapter, custom lines, custom resevoir and return line)
Innovate LC-1 wideband with blue guage $200
Mishimoto Radiator $OLD!!!!!!!
Fidanza Flywheel 1.6 $250
ACT Xtreme 6 puck unsprung clutch for 1.6 $OLD!!!!!!!
Modified angle steering knuckles $OLD!!!!!!!
Hydro ebrake $OLD!!!!!!!
Bride Replica seats $800 (pair)
1.8 driveshaft and new 1 peice axles $150
OEM "Roadster" door sills $80
2002 Miata VVT engine $450 valve cover modded with -10an breather hose and milled for COPS
5 speed transmission (good working order) $200
OEM wood nardi steering wheel with hub $200
KG works rear lip spoiler $OLD!!!!!!!
ATP vband catch can $60
GM 3 bar map sensor $60 with pigtail
Xenochron boost control solinoid $40
Muteki extended lug nuts $30 color is the titanium brownish
ARP head studs $75 torqued once to check compression, engine never ran still good shape
Fenders with Japanese side markers $OLD!!!!!!!
BRG doors $60
BRG aluminum hood $60
BRG aluminum trunk $60
XXR 002 $600 15x8 et0 with Dunlop Direzza DZ101
Here are some general pics of my car.
if you want specific pics Email me please.
Matt
m.moore13@hotmail.com
Last edited by shlammed; 09-06-2011 at 09:19 PM.
-1
09-06-2011, 05:13 PM
#5
Elite Member
Thread Starter
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
Longblock.
Intake manifold with butterflies removed, sensors, crank pully, fuel rail, throttle body, etc
No wiring.
long stick is the hyro ebrake.
The seat mounts are pretty custom to the seats....they are just a peice of bent flat stock. if you want them still, pm me.
Intake manifold with butterflies removed, sensors, crank pully, fuel rail, throttle body, etc
No wiring.
long stick is the hyro ebrake.
The seat mounts are pretty custom to the seats....they are just a peice of bent flat stock. if you want them still, pm me.
0
09-06-2011, 05:39 PM
#7
Elite Member
Thread Starter
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
i can include the alternator for $40 with NEW alternator belt.
Stock internals. bought this engine with 120,000 Kilometers on it in good condition. just changing priorities since i am downsizing the fleet to one nicer car.
Stock internals. bought this engine with 120,000 Kilometers on it in good condition. just changing priorities since i am downsizing the fleet to one nicer car.
0
09-06-2011, 06:28 PM
#8
WHAT. THE. HELL.
Sorry to hear you are parting it out man, I was looking forward to seeing your car done- you're so close!
With that said, how much for the shell? Got a buddy looking for a RHD.
Sorry to hear you are parting it out man, I was looking forward to seeing your car done- you're so close!
With that said, how much for the shell? Got a buddy looking for a RHD.
0
09-06-2011, 07:29 PM
#10
Newb
Join Date: Apr 2009
Location: East Brunswick, NJ
Posts: 31
Total Cats: 0
0
09-06-2011, 09:31 PM
#12
Junior Member
Join Date: Aug 2011
Location: Ottawa,Ontario
Posts: 45
Total Cats: 0
Great seller, buy these parts ppl.
0
09-07-2011, 04:32 PM
#17
Junior Member
Join Date: Apr 2011
Location: Lehigh Valley P.A.
Posts: 50
Total Cats: 0
Whats going on with the steering wheel and hub I sent payment.
0
09-07-2011, 08:24 PM
#19
Elite Member
Join Date: Jul 2005
Posts: 6,420
Total Cats: 84
Hi,
Will you sell me just the milled, COP-ready valve cover?
Will you sell me just the milled, COP-ready valve cover?
0
