minime

iTrader: (11)

1024x768 res pics: Hag's Neverending Garage Sale
BIG some-beech pics: Hag's Neverending Garage Sale

please refresh the webpages for the new pics to show up

Prices include shipping to the lower-48. I will not ship anywhere else, sorry.

11/4/09 additions:

* FM 90-93 Link ECU - $ 350
* 100mm shift extension - $ 10 SOLD
* Red G2 brake caliper paint kit (G2160) new/unused. I raped this box for the brake cleaner(late night wrenching) so all it is missing is a can of brake cleaner and the little wooden stir stick, which I lost. Sells for $35+ new, $ 25
* Begi '94-'97 1.8L stainless steel downpipe, divorced wastegate dump tube design. Will fit a 1.6L engine if you use a 1.8L cat or connecting pipe, as run on my 1993 1.6L. Approximately 8k miles of mainly street use(3 track days) - $ 350
* Older style Begi '94-'97 1.8L exhaust manifold, used for approximately 10k miles, Brand new thermal barrier coating inside and out by Replika Maschinen - not used since coating - basically a near new exhaust manifold - $ 400 SALE PENDING




11/3/09 additions:

* a few more shots of 1.75" diameter fire extinguisher rollbar mount, sans fire extinguisher
* Brand new 1.8L water pump. I found this in some crap that had not seen the light of day since at least 2003 when I last moved so this pump should be brand new and not re-manufactured. I see no markings on it, although I have not removed it from the bag. Selling because I already have 2 spare 1.8L water pumps - $ 50 - Pending sold
* Brey Krause R-9020 Competition Seat Brace for One-Piece Racing + R-9021 Bolt On Adjustable Mounting Bracket - both brand new and only mounted once to my old rollbar pre-cage install (ttp://www.bkauto.com/porsche/r9020.php). I bought from OG Racing for ~ $300($150 + $140). Selling for $ 250 I could not use them on my track beast since having TCD recline my seat(not enough room for it now, DOH). It should fit most cages or if you have a harness bar(ala HD sport type bars).
* BRG rear finish panel that I BROKE during polishing for another person - it can surely be epoxied and repainted - the crack is clean. $ 50
* Oregon Scientific ATC-2K digital bullet cam(similar to Hero cam). It doesn't have a rollbar mount or suction cup mount, but the video quality is on par with the Hero cam. Inside a HT equipped miata the wind noise is minimal, but top down there will be a lot of wind noise - wrappipng the unit with microphone foam helps. This would be a good second camera for PIP(front or rear facing). Selling cus I have a Hero cam and will probably sell that too since I want an integrated datalogger/video system. $ 85



Prices:

* OEM R pkg rear trunk spoiler - $ 225
* Jackson Racing 2.25" stainless steel muffler with resonated connecting pipe($475 new) mint condition - $ 350
* Flyin Miata 2.25" stainless steel muffler with resonated connecting pipe($441 new), nearly brand new - $ 375
* Flyin Miata 2.5" stainless steel double tipped turbo muffler ($580 new), great condition - $ 400

* RS Aizawa Passenger side vented headlight lid with mesh and painted SMURF BLUE, mint condition - PRICE REDUCED $125 would be great for a cold side DIY air intake or buy the driver's side from Rev9Autosport for $150 + shipping and get it painted to match. Same lids that I have on my LE.

* Memory Fab Super-Low driver's side seat mount sliders, never used(cost $150 + a 3 month wait) - $ 135
* Memory Fab double locking driver's side seat mount sliders, mounted to seat, but never used(cost $150 + a 3 month wait) - $ SOLD to Nick

* Pre-cut lexan for hardtop - $ SOLD to Brian
I bought it for $100, but I ended up installing a glass window for the CF top I have(which will soon be for sale). It has small nicks in the lexan

* Billet aluminum 1.75" diameter fire extinguisher rollbar mount clamp and plate (fire extinguisher and ext holder NOT included) - $ 40 - Pending sold to Stephen Smith[/i]

* BRG manual mirrors - $ 50

* Sparco neck brace(used only a few times) - $ 20

* NEW Begi ceramic coated1.6L turbo exh manifold - (cost $409 + $75 for coating) - PRICE REDUCED AGAIN $ 325

* FM ceramic coated 1.6L turbo exh manifold(newer design) - ceramic coating has dulled and is flaking off in a few spots, but still better than rust - PRICE REDUCED AGAIN $ 225

* Bipes ACU for timing retard(not sure which rev, I believe 1.5) - PRICE REDUCED AGAIN $ 75

* 90-97 center console(pwr window switch NOT included) - shift boot has some small tears fyi - $ 30

* NEW Sparco Pulsar 310mmx260mm steering wheel - suede w/integrated lap timer memory. This item has not been made for several years and as of 2 years ago it was near impossible to find. Cost $369 new - $ 375 FIRM.

* Brand new stock HL lids - $ 50

* AEM 30-1710(90-95) EMS - $ 850
* AEM 3.5bar map sensor - $ 100 ($150 new)
* AEM EBC - $ 75 ($100 new)
* AEM adjustable cam gears - $ 100(yes, for BOTH)

I am open to trades +/- cash too. I am looking for:

* MSPNP for 90-93 or 94-95
* 15x9 Bronze 6UL's
* what else you got?

zoomin

iTrader: (16)

Any interest in a complete 90-93 Link ECU?

miataspeed2005

iTrader: (3)

Any interest in rc440's?

p51hellfire

iTrader: (28)

interested in neck brace, throttle body, cam gears..

minime

iTrader: (11)

Mebbe, PM me what you are interested in

No, but I could use some RC750cc low impedance injectors

zoomin

iTrader: (16)

Is that AEM EMS plug and play for a 94? And why are you selling it?

minime

iTrader: (11)

Yes, it is PNP for 90-95 - the ECU connectors are the same and there are base maps for both the 1.6 and 1.8 on the aempower forums.

Selling due to lack of tuning skills. I bought a Hydra for the track car mainly for tuning support from FM, but also liked the native WI control and I wanted something that I could connect up to the RaceTech DL-1 datalogger + DASH display - I believe RT is working on a serial bus for the AEM, but they have had support for the Hydra for a long time. It will allow me to minimize additional sensors and wiring by utilizing the signals @ the ecu.

The AEM can control WI too, but did I mention my tuning skillz suck?

This is a VERY powerful ecu - I dyno'd over 250rwhp on my 1.6 w/GT2560 @ 15psi on 100 octane.

slidder

endlinks still available? I'm interested. Please let me know. Thanks.

wtb_fs

Pm sent

thanks

minime

iTrader: (11)

I sold 2 of the end links so I only have 2 left

WTB_fs - I have no PM from you...

wtb_fs

whats your email address?

minime

iTrader: (11)

PM'd to u, thx

I lowered the prices on a few items, including both 1.6L exh manifolds and the RSA pax side headlight lid.

I also adjusted prices on the big/heavy items to include shipping to the lower-48, fyi. All prices are SHIPPED.

thanks,
Mike

slidder

I'm planning to get all four endlinks if its not paid yet I'll get all four... but if its sold I'm still interested to get the pair. How much are you selling them?

wtb_fs

you've got email

minime

iTrader: (11)

$70 shipped on the end links, to the lower-48

sicklyscott

iTrader: (1)

Any chance you'd have the downpipes to match the manifolds?

minime

iTrader: (11)

I do have a very low mileage Begi divorced wastegate stainless steel unit(less than 8k miles) that I will be selling. I had it on my '93, but it will require you to use a 1.8L cat, which is a better flowing cat anyhow since it doesn't choke down the inlet to TWO INCHES.

This is the one I have: BEGI Miata Turbo Separated Gases Downpipe 1994-1997 BEGi

Cost $505+shipping new, will sell for $400 shipped to lwr 48

I will post up pics later this week.

minime

iTrader: (11)

Fire extinguisher mount is sold
1.8L water pump is pending sold
CF hardtop is pending sold, but OEM glass and OEM window seal are both available(no shipping on glass)
glass - $250 ($275 new)
window seal $50 shipped ($75 new)

minime

iTrader: (11)

Pics uploaded - please refresh webpages so they show up.

Items listed in post #1

minime

iTrader: (11)

Bump for sold/pending sold updates

shift extender is sold
Begi 1.8L man pending sale