1999 Miata project parts
08-27-2011, 12:32 AM
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: SE MI
Posts: 504
Total Cats: -3
1999 Miata project parts, injectors, trans, engine, wheels, radiator, autokonexion tr
Hi,
I think my time with this car has come to an end. I no longer have the time and soon I will be outside of the country for a few year, which means the car has to go.
It is a 1999 dark blue (do not know the actual color name), by shell I mean the actual body, harness, hood, 01+ taillights, new front fenders, trunk. Shell has manual mirrors and windows, comes with a 99 dash, no cluster though (sold to cjernigan? on here several years ago). only two rust spots (in front of rear wheels, VERY MINOR - surface rust)
Subframes were sandblasted and POR15'd, the control arms were sandblasted and powdercoated gunmetal.
All of the bushings are SuperPro adjustable (the blue ones that Flyin' Miata used to sell).
I have many parts that I can include with the shell:
- COP setup ($110 shipped) - includes toyota coils and a harness, well kind of a harness - pretty much about 3 or 4ft of wire attached to every pin on the connector.
- S5 13b ($200)
- S5 TII trans ($200)
- S5 TII LSD rear diff ($200)
- TII axles ($50)
- FC TII driveshaft (will need to be shortened to work in miata) ($80)
- Aluminum plate to make a flange to go between the BP and a TII trans if you decide to go with a BP + TII trans and diff
- Rear hubs converted to work with TII axles
- 5x114.3 front and rear hubs
- 16x8 XXR 002 (New in box, I believe they are black with polished lip) in 5x114.3 ($425 w/tires)
- 205/40r16 MAXXIS tires (will check on model) (see above)
- FMIC ($75)
- 75mm throttle body - Brand new w/gm TPS ($45)
- 4x 880cc low-imp injectors ($180)
- HASTE (?)/MISHIMOTO 55mm radiator ($200)
- Racinglifestyle.com fiberglass ver1 NB trunk ($300)
- Racinglifestyle.com fiberglass flares ($250)
- 01 headlights (will go with shell)
- ClutchNet 6 puck sprung clutch kit to mate a BP with a TII trans ($350)
- MS-Iv3.0, 12' harness (offer, might keep for a project)
- FC TII front and rear calipers (front are 4 piston calipers) ($100) - FRONT are brand new, REAR work
- SS (1/2") exhaust manifold flange, SS T3 turbo flange (1/2"), 15 or 16 x 90* elbows ss 304 sch40.
- 2x steering rack (one depowered, one not), both with inner tie rods, one with tie rod ends.
- Adjustable sway bar end links
- 2 stock rear bumpers
- 1 stock front bumper
- 94 valve cover
- 99 valve cover
- stock side skirts and rear mudflaps off of a 10AE
- many other parts I will add here
I will take photos of everything I have and post them up as soon as I get to them.
This has a price of $6000.00 OR BEST OFFER - no reasonable offer will be turned down.
Also trades for Tial Q BOV's, Tial MV-R 44mm wastegates and Holset HX35, HX40, 1500cc injectors are welcome for some parts.
I think my time with this car has come to an end. I no longer have the time and soon I will be outside of the country for a few year, which means the car has to go.
It is a 1999 dark blue (do not know the actual color name), by shell I mean the actual body, harness, hood, 01+ taillights, new front fenders, trunk. Shell has manual mirrors and windows, comes with a 99 dash, no cluster though (sold to cjernigan? on here several years ago). only two rust spots (in front of rear wheels, VERY MINOR - surface rust)
Subframes were sandblasted and POR15'd, the control arms were sandblasted and powdercoated gunmetal.
All of the bushings are SuperPro adjustable (the blue ones that Flyin' Miata used to sell).
I have many parts that I can include with the shell:
- COP setup ($110 shipped) - includes toyota coils and a harness, well kind of a harness - pretty much about 3 or 4ft of wire attached to every pin on the connector.
- S5 13b ($200)
- S5 TII trans ($200)
- S5 TII LSD rear diff ($200)
- TII axles ($50)
- FC TII driveshaft (will need to be shortened to work in miata) ($80)
- Aluminum plate to make a flange to go between the BP and a TII trans if you decide to go with a BP + TII trans and diff
- Rear hubs converted to work with TII axles
- 5x114.3 front and rear hubs
- 16x8 XXR 002 (New in box, I believe they are black with polished lip) in 5x114.3 ($425 w/tires)
- 205/40r16 MAXXIS tires (will check on model) (see above)
- FMIC ($75)
- 75mm throttle body - Brand new w/gm TPS ($45)
- 4x 880cc low-imp injectors ($180)
- HASTE (?)/MISHIMOTO 55mm radiator ($200)
- Racinglifestyle.com fiberglass ver1 NB trunk ($300)
- Racinglifestyle.com fiberglass flares ($250)
- 01 headlights (will go with shell)
- ClutchNet 6 puck sprung clutch kit to mate a BP with a TII trans ($350)
- MS-Iv3.0, 12' harness (offer, might keep for a project)
- FC TII front and rear calipers (front are 4 piston calipers) ($100) - FRONT are brand new, REAR work
- SS (1/2") exhaust manifold flange, SS T3 turbo flange (1/2"), 15 or 16 x 90* elbows ss 304 sch40.
- 2x steering rack (one depowered, one not), both with inner tie rods, one with tie rod ends.
- Adjustable sway bar end links
- 2 stock rear bumpers
- 1 stock front bumper
- 94 valve cover
- 99 valve cover
- stock side skirts and rear mudflaps off of a 10AE
- many other parts I will add here
I will take photos of everything I have and post them up as soon as I get to them.
This has a price of $6000.00 OR BEST OFFER - no reasonable offer will be turned down.
Also trades for Tial Q BOV's, Tial MV-R 44mm wastegates and Holset HX35, HX40, 1500cc injectors are welcome for some parts.
Last edited by Dhaark; 09-05-2011 at 02:18 AM.
0
08-27-2011, 12:41 AM
#2
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
Hi,
I think my time with this car has come to an end. I no longer have the time and soon I will be outside of the country for a few year, which means the car has to go.
It is a 1999 dark blue (do not know the actual color name), by shell I mean the actual body, harness, hood, 01+ taillights, new front fenders, trunk.
Subframes were sandblasted and POR15'd, the control arms were sandblasted and powdercoated gunmetal.
All of the bushings are SuperPro adjustable (the blue ones that Flyin' Miata used to sell).
I have many parts that I can include with the shell:
- S5 13b
- S5 TII trans
- S5 TII LSD rear diff
- TII axles
- FC TII driveshaft (will need to be shortened to work in miata)
- Aluminum plate to make a flange to go between the BP and a TII trans if you decide to go with a BP + TII trans and diff
- Rear hubs converted to work with TII axles
- 5x114.3 front and rear hubs
- 16x8 XXR 002 (New in box, I believe they are black with polished lip) in 5x114.3
- 205/40r16 MAXXIS tires (will check on model)
- FMIC
- 75mm throttle body
- 4x 900cc low-imp injectors
- MISHIMOTO 55mm radiator
- Racinglifestyle ver1 NB trunk
- Racinglifestyle flares
- 01 headlights
- ClutchNet 6 puck sprung clutch kit to mate a BP with a TII trans
- MS-Iv3.0, 12' harness
- FC TII front and rear calipers (front are 4 piston calipers)
- many other parts I will add here.
I will take photos of everything I have and post them up.
This has a price of $500,000.00 OR BEST OFFER - no reasonable offer will be turned down.
Since this is kind of parts and kind of a car. Mods, I think I posted this in the wrong subforum (by accident) please move?
I think my time with this car has come to an end. I no longer have the time and soon I will be outside of the country for a few year, which means the car has to go.
It is a 1999 dark blue (do not know the actual color name), by shell I mean the actual body, harness, hood, 01+ taillights, new front fenders, trunk.
Subframes were sandblasted and POR15'd, the control arms were sandblasted and powdercoated gunmetal.
All of the bushings are SuperPro adjustable (the blue ones that Flyin' Miata used to sell).
I have many parts that I can include with the shell:
- S5 13b
- S5 TII trans
- S5 TII LSD rear diff
- TII axles
- FC TII driveshaft (will need to be shortened to work in miata)
- Aluminum plate to make a flange to go between the BP and a TII trans if you decide to go with a BP + TII trans and diff
- Rear hubs converted to work with TII axles
- 5x114.3 front and rear hubs
- 16x8 XXR 002 (New in box, I believe they are black with polished lip) in 5x114.3
- 205/40r16 MAXXIS tires (will check on model)
- FMIC
- 75mm throttle body
- 4x 900cc low-imp injectors
- MISHIMOTO 55mm radiator
- Racinglifestyle ver1 NB trunk
- Racinglifestyle flares
- 01 headlights
- ClutchNet 6 puck sprung clutch kit to mate a BP with a TII trans
- MS-Iv3.0, 12' harness
- FC TII front and rear calipers (front are 4 piston calipers)
- many other parts I will add here.
I will take photos of everything I have and post them up.
This has a price of $500,000.00 OR BEST OFFER - no reasonable offer will be turned down.
Since this is kind of parts and kind of a car. Mods, I think I posted this in the wrong subforum (by accident) please move?
0
08-27-2011, 12:46 AM
#5
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,022
Total Cats: 304
WOW! Member since 05?? That's awesome!
Let's seriously get serious about the price, I mean seriously...how much do you want for this thing. Or should I say, "how much do you need to get out of this thing"?
Let's seriously get serious about the price, I mean seriously...how much do you want for this thing. Or should I say, "how much do you need to get out of this thing"?
0
08-27-2011, 12:51 AM
#9
Senior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: SE MI
Posts: 504
Total Cats: -3
So. smartest thing to do is to sell it and IDK how much I need. I guess enough to make me want to spend a weekend loading all the parts onto or into a trailer/truck.
13b comes with porting templates and porting tools (actual grinder and bits)
Price is included at $500,000.00 because IDK what to ask, so that is why it is what it is with the part "or best offer"
btw. car and parts are located in Rochester Hills, MI
0
08-27-2011, 01:47 PM
#19
Newb
Join Date: Mar 2011
Posts: 13
Total Cats: 1
Is the soft top in good shape? How much for top and frame shipped to Reno, NV (check greyhound)?
0
08-27-2011, 01:59 PM
#20
Senior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: SE MI
Posts: 504
Total Cats: -3
But... I can get you a minty one off of a 2003 for $350 (frame and soft top with glass window)
+ shipping
Last edited by Dhaark; 08-27-2011 at 03:02 PM.
0
