cmalouf

iTrader: (2)

Hey guys,

I have a few parts that I have taken off of my car after my cyl 4 oil ring failed. The fully built engine is up for sale in another thread in the classifieds. I am pulling the motor this weekend for a 5.0 swap and the parts will be ready for shipment/pickup on Monday. I'll upload pictures as I take the parts off, PM me with any questions.

Here are my parts for sale:
-Begi Shanghai GT2854 Turbo (only) with about 10k miles on it. No shaft play, drove great. Will need two new exhaust studs. $200

-5 speed transmission with about 100k miles, also shifts well and has shifter included $150

-Ebay aluminum radiator with few bent fins, no leaks $70

-ID1000 injectors and pigtails with 5k miles, no problems $420

-OEM Flywheel with 15k miles $80

-1.8 brakes and brackets with decent rotors $200

-90A PnP alternator, only used for 1k miles, $85

SOLD ITEMS
-MiataRoadster SSK for 1999-2000 transmissions (only used for 10 miles, oil ring failed on the testdrive for the shifter) SOLD
-FM newest generation FMIC setup with TurboXS BOV SOLD
-Trackspeed Toyota COPS setup with bracket with PnP harness, two of each type of coil, worked great SOLD
-Supermiata crossflow radiator SOLD
--SPAL puller fans (same as those used in FM Stage 2 Cooling setup) SOLD
-Braineak built MS3x w/ IAT and EBC SOLD
-FM Stage 1 clutch with about 15k miles, never slipped SOLD
-6 speed transmission from a 2000 SE with about 95k, stock shifter and good condition boots included. Shifts well, no problems, hasn't been abused. SOLD
-4.1 Torsen and driveshaft, axles may be able to be salvaged but aren't in the best shape SOLD

95Mmiata

Willing to sell the shifter off the stock trans?

cmalouf

iTrader: (2)

Trying to keep things together as of now, if things change I'll let you know.

Heyitsryan

I'm interested in a few parts, pm coming your way sir.

brainzata

iTrader: (4)

Would you sell the crossflow with out the shroud and fans? Is it used? If so pm me your price shipped to 94513.

240_to_miata

iTrader: (2)

Also interested in Crossflow. PMing now

Shortpersonbk

pm me info on the megasquirt?
whats is it pnp with if anything.

Rallas

iTrader: (9)

I'll take the fans!

jwilbanks197

Ill have the Torsen with the axles and driveshaft! PMing now

Ondrej

Would you sell the manifold by it self if so how much thanks

cmalouf

iTrader: (2)

Trying to keep turbo setup together as of now

btabor

iTrader: (3)

Did you use that 6 speed with the turbo setup?

cmalouf

iTrader: (2)

Yes but only for about 3k miles and only at 7psi until boosting 14 for three pulls before blowing the ring. It's just a weekend car and I've never launched, raced or even auto crossed it. You can see the flywheel and pressure look brand new, and they were used on the 5sp for about 10k miles too, no abuse here.

psyber_0ptix

iTrader: (4)

I might be interested in the Trans. I'm in Arlington

viriiguy

iTrader: (1)

I'll take the Radiator. PM Incoming.

Ruggedcat

Pm sent for downpipe!

cmalouf

iTrader: (2)

Only BEGI part that remains is the Shanghai GT2854 turbo. Downpipe and mani and associated parts are sold.

Ondrej

Still interested in the manifold if you change your mind on separating it and maybe the downpipe too let me know thanks

alex33

turbo in good condition ? im interessed !!

cmalouf

iTrader: (2)

Great condition, just a little dirty. Zero shaft play, boosted great on my car. Only removed to install my gt2560r. Will just need two exhaust studs as they came out with the nuts (I recommend using resbond to hold them in).