Miata is sold, heres the stuff left over'
02-01-2007, 04:24 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Anaheim, Ca
Posts: 118
Total Cats: 0
Miata is sold, heres the stuff left over'
Torsen Rear End conversion. Includes the following
~1 piece axles/halfshafts from later model miatas. Stonger acording to the miata gurus than the seperate halfshafts and axles.
~1.8 driveshaft
~1.8 rearend from an NB with an OPEN diff
~Torsen LSD from a 97 I believe with what I was told 30k miles.
All this for $700. Shipping extra and expensive. Pickup gets priority.
Still have 2 almost complete motors. Just missing valve covers and oil dipsticks(apparently these are in high demand). One has bad rings, the other needs a crank(nose sheered off). $200 each or $300 for both.
A set of 255/40R17 falkin azena RT615s with ~50% left in the tread. $200 for the set. Thats bairly over the cost of just one new one!
Turbo kit for 1.6. Less than 3k miles on entire thing. Full tubular greddy manifold(JDM gurus say it was discontinued in japan 5-6 years ago, and I have found that it was around 1600 brand new for JUST the manifold), Greddy 16g turbo, starion intercooler with lots of assorted piping, greddy type S bov with flange welded onto piping, HKS external wastegate, and custom dp. Basically, the basics to get it working. It was at full spool on just the wastegate spring(6psi) at 3k rpm without my electronic boost controller holding the wastegate from cracking open. $1500 for the basics.
Other turbo usefull stuff.
HKS 1st gen electronic boost controller $150 or $100 if you buy kit
AEM universal fpr brand new $100 or $50 if you buy kit
Cusco Oil Catch Can Brand new $100 or $50 with kit
Walburo 255 used same as turbo. $50 or free with kit
Aluminum Flywheel and brand new 6 puck clutch. link to clutch I have $350 plus shipping. Flywheel is used and has a bit of rust on the friction surface.
Im sure I still have other stuff, so this will be updated when I remember.
~1 piece axles/halfshafts from later model miatas. Stonger acording to the miata gurus than the seperate halfshafts and axles.
~1.8 driveshaft
~1.8 rearend from an NB with an OPEN diff
~Torsen LSD from a 97 I believe with what I was told 30k miles.
All this for $700. Shipping extra and expensive. Pickup gets priority.
Still have 2 almost complete motors. Just missing valve covers and oil dipsticks(apparently these are in high demand). One has bad rings, the other needs a crank(nose sheered off). $200 each or $300 for both.
A set of 255/40R17 falkin azena RT615s with ~50% left in the tread. $200 for the set. Thats bairly over the cost of just one new one!
Turbo kit for 1.6. Less than 3k miles on entire thing. Full tubular greddy manifold(JDM gurus say it was discontinued in japan 5-6 years ago, and I have found that it was around 1600 brand new for JUST the manifold), Greddy 16g turbo, starion intercooler with lots of assorted piping, greddy type S bov with flange welded onto piping, HKS external wastegate, and custom dp. Basically, the basics to get it working. It was at full spool on just the wastegate spring(6psi) at 3k rpm without my electronic boost controller holding the wastegate from cracking open. $1500 for the basics.
Other turbo usefull stuff.
HKS 1st gen electronic boost controller $150 or $100 if you buy kit
AEM universal fpr brand new $100 or $50 if you buy kit
Cusco Oil Catch Can Brand new $100 or $50 with kit
Walburo 255 used same as turbo. $50 or free with kit
Aluminum Flywheel and brand new 6 puck clutch. link to clutch I have $350 plus shipping. Flywheel is used and has a bit of rust on the friction surface.
Im sure I still have other stuff, so this will be updated when I remember.
Last edited by Betrayed; 02-06-2007 at 02:18 PM.
0
02-01-2007, 05:27 PM
#5
Junior Member
Join Date: Dec 2006
Location: Miata.net
Posts: 46
Total Cats: 0
0
02-01-2007, 08:23 PM
#6
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Anaheim, Ca
Posts: 118
Total Cats: 0
sorry, thought i had my location on the sidething, but I guess I never got around to putting it in. Yes, anaheim california
0
02-06-2007, 02:16 PM
#8
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Anaheim, Ca
Posts: 118
Total Cats: 0
updated!
0
02-09-2007, 05:22 PM
#9
Newb
Join Date: Feb 2007
Posts: 3
Total Cats: 0
if the 97 torsen is still for sale ill take it
0
02-10-2007, 06:21 AM
#10
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Anaheim, Ca
Posts: 118
Total Cats: 0
its still avalable'
0
02-10-2007, 05:16 PM
#12
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Anaheim, Ca
Posts: 118
Total Cats: 0
what would you like pics of?
0
02-11-2007, 12:28 AM
#13
Junior Member
Join Date: Feb 2007
Location: Ormond Beach, FL
Posts: 97
Total Cats: 0
do you still have the basic turbo stuff? just lookin into my options.
0
02-11-2007, 01:20 AM
#14
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Anaheim, Ca
Posts: 118
Total Cats: 0
I still have the turbo stuff, ill get some pictures for you in the morning'
0
09-02-2007, 04:20 PM
#15
Junior Member
Join Date: Aug 2007
Location: The Netherlands
Posts: 49
Total Cats: 0
Still things left to sell?
0
09-03-2007, 11:40 AM
#19
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
OK, kind of rediculous. Thread is 7 months old and OP hasn't logged on in 3 weeks.
If he comes back and wants to update this thread, we'll unlock. But this puppy is toasted for now.
If he comes back and wants to update this thread, we'll unlock. But this puppy is toasted for now.
0
Thread
Thread Starter
Forum
Replies
Last Post
mikeflys1
Miata parts for sale/trade
15
10-27-2018 02:19 PM
eddy1128
Miata parts for sale/trade
8
12-10-2015 05:34 PM
