Turbo Kit Part Out, DIYPNP selling everything!
09-01-2013, 02:18 PM
#1
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
Megasquirt DIYPNP, Turbo Parts
Hey Everyone,
Im selling my prized turbo kit because I bought a motorcycle cafe racer project a while back and the miata has just been sitting in my garage un-wrenched ever since. This kit was never ran on my car with the exception of mock up fittings and the Megasquirt being used so it really sucks to sell it but its useless to me just sitting there. Most of this stuff I bought from 18psi with a few exceptions so some parts are lightly used and some are brand new. I'm trying to sell this all as one big chunk but Ill consider offers for parts. (Note: Not every little item listed is pictured)
Here's whats for sale:
Glowshift Pancake Oil Adapter w/ ATP Braided Steel Oil Feed line attached $50 Shipped (New, was test fitted on my car though)
Flyin Miata Exhaust Brace 2.5" $20 Shipped (Brand new)
Megasquirt DIYPNP w/ Sequential Injection, Barometric Correction, Alternator Control and Boost control $500 Shipped(Used on my 1999 for a brief period of time, comes with USB adapter and Air temp sensor)
Vibrant 350HP Intercooler w/piping SOLD (Intercooler is new, I had some mounting bungs welded on top and an air temp bung welded on the side. The welder got some weld on the inside threads of the air temp bung but i was still able to thread in the sensor. Comes with aluminum flat stock bent up to mock the Flyin Miata system)
Forge Dual Piston BOV SOLD
Cone Style Air Filter SOLD (Brand new)
Garrett GT2860RS Turbo SOLD
ETD Long Tube Manifold SOLD
Unknown Brand Downpipe SOLD
Tial External Wastegate SOLD
Turbo Heat Shield and turbo blanket SOLD
I'll take paypal
Thanks All!
Im selling my prized turbo kit because I bought a motorcycle cafe racer project a while back and the miata has just been sitting in my garage un-wrenched ever since. This kit was never ran on my car with the exception of mock up fittings and the Megasquirt being used so it really sucks to sell it but its useless to me just sitting there. Most of this stuff I bought from 18psi with a few exceptions so some parts are lightly used and some are brand new. I'm trying to sell this all as one big chunk but Ill consider offers for parts. (Note: Not every little item listed is pictured)
Here's whats for sale:
Glowshift Pancake Oil Adapter w/ ATP Braided Steel Oil Feed line attached $50 Shipped (New, was test fitted on my car though)
Flyin Miata Exhaust Brace 2.5" $20 Shipped (Brand new)
Megasquirt DIYPNP w/ Sequential Injection, Barometric Correction, Alternator Control and Boost control $500 Shipped(Used on my 1999 for a brief period of time, comes with USB adapter and Air temp sensor)
Vibrant 350HP Intercooler w/piping SOLD (Intercooler is new, I had some mounting bungs welded on top and an air temp bung welded on the side. The welder got some weld on the inside threads of the air temp bung but i was still able to thread in the sensor. Comes with aluminum flat stock bent up to mock the Flyin Miata system)
Forge Dual Piston BOV SOLD
Cone Style Air Filter SOLD (Brand new)
Garrett GT2860RS Turbo SOLD
ETD Long Tube Manifold SOLD
Unknown Brand Downpipe SOLD
Tial External Wastegate SOLD
Turbo Heat Shield and turbo blanket SOLD
I'll take paypal
Thanks All!
Last edited by biohzrd53188; 09-14-2013 at 10:50 PM.
0
09-01-2013, 03:48 PM
#2
Newb
Join Date: Aug 2013
Posts: 5
Total Cats: 0
thats funny i'm looking to sell my "cafe" motorcycle and put a turbo on my miata.
0
09-01-2013, 07:33 PM
#4
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
0
09-02-2013, 05:35 AM
#5
Newb
Join Date: Jun 2013
Posts: 8
Total Cats: 0
Do you have a picture of the IC piping? What size is it?
0
09-02-2013, 06:09 AM
#6
That is such a good deal on the IC I might have to build a turbo kit for one of my other miatas just to buy it! If only I had the cash.....I am $13K into my current build and the wife doesn't see the humor...
0
09-02-2013, 09:53 PM
#7
Junior Member
Join Date: Aug 2013
Posts: 91
Total Cats: 2
2nd for intercooler kit
0
09-02-2013, 11:14 PM
#8
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
Sorry for the late response guys, I've been out and about a lot with family today. The intercooler piping is 2 1/4" ID, the intercooler inlet and outlet are 2" ID. Theres also a random 1.5" ID pipe I'm throwing in. No takers yet. 
0
09-03-2013, 12:44 AM
#10
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
Eeek thanks Vlad! Maybe I inhaled too much fiberglass resin making a seat for my bike on Sunday. :(
0
09-03-2013, 01:44 AM
#11
Junior Member
Join Date: Aug 2013
Posts: 91
Total Cats: 2
How much would the shipping for the intercooler and piping will be to 00969?
Last edited by sharkycarlos; 09-03-2013 at 01:47 AM. Reason: spell check
0
09-03-2013, 01:58 AM
#12
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
0
09-05-2013, 06:12 PM
#13
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
Lowered price on the DIYPNP! Still have a bunch of stuff for sale! 
0
09-06-2013, 11:47 AM
#15
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
0
09-10-2013, 04:11 PM
#17
Junior Member
Join Date: Sep 2012
Location: Cranston, RI
Posts: 283
Total Cats: 12
I'll take the air filter.
0
09-11-2013, 01:08 AM
#18
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
0
09-13-2013, 06:23 PM
#19
Newb
Thread Starter
Join Date: Jun 2013
Location: Folsom, CA
Posts: 32
Total Cats: -3
Still a few items for sale, make me and offer if you don't feel the price is right!
0
02-24-2014, 02:57 PM
#20
Newb
Join Date: Dec 2013
Posts: 26
Total Cats: -14
interested in ms and manifold i cant pm yet let me know if still available.
0
