james399

iTrader: (12)

hey all, I don't have the numbers just yet, but this is what I have in the works...

oil filter relocation kits,
and
oil cooler kits.


as for numbers, i will need about 15 guys to get in on this... (this is because we have to order the billet pieces in bulk)


updated info 9/17/09:

a couple of things
1. all block housings will be in black billet
2. you will have your choice of color (red blue, and black)
.....please pick one color for all of the following, else it will be a logistical nightmare
.....a. billet filter housing
.....b. push lock AN fittings for the lines
^^(obviously, if the package you get does not contain all of the above, the parts that you do get will be the color of your choice... just in case that isn't clear...)
**filter housing adaptor, and block housing adaptor will now be black**
3. all reusable oil filters will be black billet
4. all oil coolers will come with steel adaptors, (since the oil cooler itself is steel, using the steel adapters is safer than using aluminum pieces, very easy to **** up an oil cooler if you using aluminum adapters)
5. oil filter housing bracket will be polished, the backing plate will not
6. all oil filter housing whether billet or cast will come with aluminum bracket, backing plate, and mounting hardware.

package components:

oil filter relocation kits:

stage 1 kit: this comes pre assembled plug and play
1. cast oil filter housing (this is the same cast units sold by everyone else)
2. steel adapters for oil filter housing
3. pre-measured blue lines with push lock an fittings rated for 300 psi
4. billet block housing piece with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters

kit stage 1+: this comes pre assembled plug and play
1. cast oil filter housing (this is the same cast units sold by everyone else)
2. steel adapters for oil filter housing
3. pre-measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters

stage 2: this comes pre assembled plug and play
1. billet oil filter housing
2. black aluminum adapters for oil filter housing
3. pre measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters

stage 3: this comes pre assembled plug and play
1. billet oil filter housing (choice of color black, blue, and red,)
2. black aluminum adapters for oil filter housing
3. pre measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. reusable aluminum oil filter (I SAW THIS AND IT IS SICK!)
6. oil filter housing bracket, backing plate, mounting hardware
7. block housing adapters
8. block housing aluminum adapters

Oil cooler packages:

stage 1 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi rated line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 1 kit +: does not come pre assembled, you must request the amount of feet of black aeroquip line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 2 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi rated line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 2 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 3 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 3 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters


stage 4 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 4 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters

stage 5 kit: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. billet reusable oil filter (seriously you can have a fresh oil filter for every track event, never buy and throw away an oil filter ever again)
9. oil filter housing bracket, backing plate, mounting hardware
10. block housing aluminum adapters

stage 5 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. billet reusable oil filter (seriously you can have a fresh oil filter for every track event, never buy and throw away an oil filter ever again)
9. oil filter housing bracket, backing plate, mounting hardware
10. block housing aluminum adapters

edit updated 9/21
pictures:

reusable oil filter


reusable oil filter insides


300 psi line


aeroquip line


black aluminum adaptors for oil filter housing for block housing


red filter housing


blue filter housing


red hose fittings


blue hose fittings


black hose fittings



-james

james399

iTrader: (12)

ok, so check out the picts, again these will be available in black, red, and blue.

if you notice, there will be an aluminum bracket that will mount to the fire wall that will allow you to point the inlet and outlet forward, this negates the need for 90 degree an fitting, and will be a cleaner install. Also, because the fire wall is thin, we are going to include an additional backing plate,
(as we all learned in phsyics, distribution of the stress on an item over a larger surface area will allow for less stress in one particular point... in other words, i don't want all of you coming back saying that your fire wall is ripping... lol...)

as in the last group buy, all necessary hardware will be included... as for instruction on installation... i'm lazy, and will be posting a how to directly in this thread....

let me know if you guys are interested in this...

ripracer

iTrader: (4)

I'm in it for the block and filter adapter the rest I will make on my own.

FRT_Fun

iTrader: (19)

I may be in on this pending on price.

gospeed81

iTrader: (51)

I would definitely be in on this group buy...I ended up being sorry I bailed on the last one.

ArtieParty

iTrader: (1)

I might be in depending on price too. Although I should probably save for a new engine first.

buffon01

iTrader: (9)

subscribing for price

leatherface24

iTrader: (10)

Id be down for this

disturbedfan121

iTrader: (5)

i might be in for this too.

mx5autoxer

iTrader: (1)

Im good if the price is.

Fidgitk

iTrader: (3)

I'm pretty interested too, I've got an rx-7 oil cooler I just need the rest of the parts.

b16acrx1988

price please

Laur3ns

Might be interested if this is not another overdesigned, over-the-top engineered, space age meterial, that takes years to market and costs a Caddilac.

Had to vent...

p51hellfire

iTrader: (28)

Same^I need the lines and the adapter plate.

kjr50

iTrader: (5)

Would like to have a sensor port on remote filter mount.

miatauser884

iTrader: (11)

I'm interested, but it is price dependent

jedduh01

iTrader: (4)

Very interested... really more interested in just a cooler kit... leave the filter on the block... add adapter, and lines for a kit.

(you prob will have to go spec lengths for your cooler lines, or you will be giving away lots of extra cause i would for sure OVER ORDER to make sure my lengths are covered.)

gospeed81

iTrader: (51)

+1 on both of the above


A big seller would be an adapter plate (filter stays on block) with a temp sensor fitting, and lines to an oil cooler setup.

This would keep costs down those of us that don't care about filter relocation.

poisonousbeef

^ I agree. I'd be more likely to run the cooler and leave the filter on the block, any provisions for temp sensor would just be a huge plus.

dstn2bdoa

iTrader: (18)

Price dependent.