Misc. parts for sale
05-06-2010, 10:46 AM
#1
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
Misc. parts for sale
I have some parts for sale that just came off my 95
-Complete A/C system (Compressor, evaporator, condensor, and hardlines) $200
-Power steeringp pump and reservoir $75
-Passanger side manual black mirror -$40
-Door panels $50
-14" steelies with tires $100
-Air bag (driver) $45
-Air box assembly and AFM $50
-Stock ECU $40
-Soft top frame $40
-My bitch *** 2860 that I could not clock $450
-Complete A/C system (Compressor, evaporator, condensor, and hardlines) $200
-Power steeringp pump and reservoir $75
-Passanger side manual black mirror -$40
-Door panels $50
-14" steelies with tires $100
-Air bag (driver) $45
-Air box assembly and AFM $50
-Stock ECU $40
-Soft top frame $40
-My bitch *** 2860 that I could not clock $450
Reply
0
0
05-06-2010, 02:35 PM
#4
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
2860 .64 a/r I bought it advertised to be used for 5k miles. There's no shaft play.
I was not able to remove the turbine housing. If you have a log, or any manifold, in which the drain and feed are 90* from the flange, then there's no problem.
I have a bottom mount manifold. I need the drain and feed to be paralled to the flange.
LMK
I was not able to remove the turbine housing. If you have a log, or any manifold, in which the drain and feed are 90* from the flange, then there's no problem.
I have a bottom mount manifold. I need the drain and feed to be paralled to the flange.
LMK
Reply
0
0
05-06-2010, 03:28 PM
#8
Oh yeah, meant to PM you about the Spud for sale.
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Reply
0
0
05-06-2010, 03:42 PM
#9
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
Oh yeah, meant to PM you about the Spud for sale.
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Reply
0
0
sent me a message on gmail with the link. I dont know how I had missed it in the past.
05-07-2010, 03:02 PM
#15
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680
Bump, because I backed out on the turbo. Found out it was most likely a 2560. Which is still a good turbo, just wont work with V-Bands.
Last edited by shuiend; 05-10-2010 at 06:32 AM.
Reply
0
0
