Bilstein Shocks - NB HDs, and 99 Hard S
#1
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Bilstein Shocks - NB HDs, and 99 Hard S
(1) set of NB valved Bilstein HDs less than 10K miles - $275 shipped
(1) set of "Hard S" Bilsteins (yellow) from a '99 Sport Package mileage unknown - $175 shipped
VERY open to offers.
I have NB style perches for both sets, as well as a set of "cut" MSM springs I'll throw in free. The HDs have had the small perch alignment tab ground off to accept adjustable collars.
One set is one the car, so first set to sell shipped, and if someone is interested in the other set they'll have to wait until my new shocks come in, but I'll give you a discount or free shipping.
Thanks.
(1) set of "Hard S" Bilsteins (yellow) from a '99 Sport Package mileage unknown - $175 shipped
VERY open to offers.
I have NB style perches for both sets, as well as a set of "cut" MSM springs I'll throw in free. The HDs have had the small perch alignment tab ground off to accept adjustable collars.
One set is one the car, so first set to sell shipped, and if someone is interested in the other set they'll have to wait until my new shocks come in, but I'll give you a discount or free shipping.
Thanks.
#6
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Good deal.
Didn't want to out you, but since you're here now...yeah, splitime has them pretty well spoken for.
If someone is interested in my custom rigged threaded collars and eGay springs on the cheap let me know. They'll be pretty useless to me. They are made to EXACTLY fit a Bilstein shock body, with a flat perch sitting directly on the ring, allowing you to adjust lower than setting them on top of the OEM perch. This perch also has a retaining ring that permanently holds the threaded collar (interference fit ID), and is a 2.5" OD if you just want to set a spring on top of it. Really flexible.
May have NA mounts for sale soon too.
Didn't want to out you, but since you're here now...yeah, splitime has them pretty well spoken for.
If someone is interested in my custom rigged threaded collars and eGay springs on the cheap let me know. They'll be pretty useless to me. They are made to EXACTLY fit a Bilstein shock body, with a flat perch sitting directly on the ring, allowing you to adjust lower than setting them on top of the OEM perch. This perch also has a retaining ring that permanently holds the threaded collar (interference fit ID), and is a 2.5" OD if you just want to set a spring on top of it. Really flexible.
May have NA mounts for sale soon too.
#9
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Will let you guys know if splitime doesn't take them.
He's really just waiting on pics. I'll be swapping the motor this weekend and try to get them off.
Thanks for all the interest.
He's really just waiting on pics. I'll be swapping the motor this weekend and try to get them off.
Thanks for all the interest.
#11
Junior Member
iTrader: (3)
Join Date: Feb 2008
Location: Pollock Pines, CA
Posts: 281
Total Cats: -2
how much for the collars? you think they will they work with and/or be able to raise 1.5" lowering springs (h&r race)?
i may be interested in the mounts as well
i may be interested in the mounts as well
Last edited by frostyllama; 02-20-2010 at 07:40 PM.
#12
To the guy above me, no, the collars are most likely not going to work on OE sized springs, and are most likely for 2.5" diameter springs which are typical with coilovers.
Good deal.
If someone is interested in my custom rigged threaded collars and eGay springs on the cheap let me know. They'll be pretty useless to me. They are made to EXACTLY fit a Bilstein shock body, with a flat perch sitting directly on the ring, allowing you to adjust lower than setting them on top of the OEM perch. This perch also has a retaining ring that permanently holds the threaded collar (interference fit ID), and is a 2.5" OD if you just want to set a spring on top of it. Really flexible.
If someone is interested in my custom rigged threaded collars and eGay springs on the cheap let me know. They'll be pretty useless to me. They are made to EXACTLY fit a Bilstein shock body, with a flat perch sitting directly on the ring, allowing you to adjust lower than setting them on top of the OEM perch. This perch also has a retaining ring that permanently holds the threaded collar (interference fit ID), and is a 2.5" OD if you just want to set a spring on top of it. Really flexible.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM