rharris19

iTrader: (41)

We have six projects going on in the shop right now and we really need to knock that down to three or four so we can actually get something done and not feel overwhelmed. Age/mileage is noted. Prices are without shipping. If you need a picture of anything specific let me know and I will shoot some over to you.

Engine/Turbo parts:
EUDM intake manifold. Bought new from corksport and have put less than 500 miles on it. $400

Complete 94-97 Turbo kit: Newest BEGi manifold, Stainless Steel Separate Gases Downpipe, GT2560R, BEGI intercooler piping, large intercooler(non a/c friendly) Oil lines, water supply fittings, BEGi Brake master heat shield, K&N filter, T-bolt clamps. 3000 miles SOLD

Garrett GT2554R 4000 miles since new from BEGi with ported wastegate. No shaft play. SOLD

NEW current FM 1.8L 94-97 manifold/Downpipe combo w/ trackspeed inconel M10 stage 8 kit installed. $750

550cc RX7 injectors. PNP w/ 5000 miles since cleaned. I have no paperwork on them. $95
460cc RX7 injectors. PNP w/3000 miles since cleaned. No papaerwork. $85

New Brain built MS2 w/ sequential injection for 94-95. Comes with ECU, AIT, EBC: $550

LC1 w/ G2 gauge. 1000 miles $SOLD

Enthuza Stainless Dual Racer 3.0” exhaust. Comes with resonated test pipe. 1000 street miles 2 track days. $SOLD

FM oil cooler kit 94-97 complete. 3000 street miles: $275

ARP main studs used 3000 miles $Sold

ARP head studs used 3000 miles $Sold




Trans/Diff/Brakes
(2) Trackspeed 11.00 front BBK. Comes with rotors and Carbotech XP12 pads w/ ¾ life left. $550 each

Mazdaspeed 6-Speed w/ shifter 55k Miles on original car and 3000 street miles from us: SOLD

FM 10.3lb flywheel: 3000 street miles: $200

1.8L ACT Extreme Clutch pressure plate and disc. 3000 street miles: $Sold


Torsen LSD 4.1 with one piece axles and driveshaft. Energy suspension poly diff bushings installed: 133k miles: $Sold

Tires:
(4) 225/45/15 NT01 w/ 6 track days. They still have tread and have no flat spots. $225

Suspension
Tein Monoflex 8/10 kg springs. EDFC electronic shock controller installed. I am not going to take this back off. 1000 miles. $SOLD

FM 94-97 sway bar set $SOLD

(2) Complete set of control arms w/ poly bushings $SOLD

Other:
FM frame rail reinforcements SOLD

jbrown7815

iTrader: (1)

So tempted on some of that stuff but I already owe you a ton of money for the built motor I'm buying

UrbanSoot

iTrader: (24)

Sell the diff without axles? Possibly interested on coilovers and a set of sways as well if price with shipping is right (90046)

UrbanSoot

iTrader: (24)

Think turbo setup can be modified for NB?

blaen99

iTrader: (6)

I'm interested in everything BUT the diff itself if you are willing to split it up for Urban and I (Driftshaft, axles, carrier.)

rharris19

iTrader: (41)

If I have have someone for everything that's fine.

Venice

iTrader: (2)

Size of sways and do they come with the end links .

rharris19

iTrader: (41)

1" front and 0.625" rear. The FM kit doesn't come with new endlinks.

hornetball

iTrader: (4)

PM'd on the LC-1 and a set of control arms.

gtlee77

iTrader: (4)

PM sent.

hustler

iTrader: (6)

I need a 1994 tweeter cover for the door. Can you help?

If anyone needs wants to buy these parts from DFW I can transport them back to Dallas this weekend. The fee will be 1 tank of fuel

rharris19

iTrader: (41)

You talking about the speaker cover at the bottom of the door? I think I have a couple sets of door panels up in the attic. Let me check if any are the 94-95 ones

hustler

iTrader: (6)

The one on the top of the door, on the hump. Mine fell off and I keep goring my hand on it.

I'll be in Houston this weekend and plan on getting a cocktail at Anvil (before the E90 crew and hipsters show up) and dinner at Sammy's Wild Game Grill if you want to tag along.

BenR

iTrader: (2)

Did I read this right? 2 full sets of control arms including uppers and lowers with poly bushings, for $225 each for a full set?

If true I'm probably in for a set, do you have pics?

rharris19

iTrader: (41)

I just went to Anvil not knowing what that place was. Going to the bar to try to order a natural light after seeing him work on a mohito for 10 minutes really made my night. The bartender was not as amused as I was.

We will be busting *** on the bus to get it ready for Lemons in February all weekend, so it will be hard for me to get away. If you are on the south side, let me know though.

rharris19

iTrader: (41)

I will get some pictures and send them over to you, but yes. I priced everything hoping it would all be gone fairly quickly to make space

90 Turbo

iTrader: (3)

will those frame rails fit in your car hustler?

hornetball

iTrader: (4)

Hustler, I'm in for your shipping offer. I'm getting the LC-1 and one set of the loaded control arms. I probably should have asked how big the tank was! LOL.

hustler

iTrader: (6)

We can fill up the passenger side area, the trunk is packed. If there is a lot of stuff coming back I can remove the passenger seat. The tank is Miata sized. You'll have to come to Lewisville to pick it up soon. If I'm bringing a trans or rear end, you'll have to pick it up on Sunday evening after ~5 before the Forza race at 8. If you want to meet me somewhere along my way home, that's cool too.

I'm on a tight schedule.

Oscar

iTrader: (2)

I'll give you $300 shipped for the full control arm set w/ bushings. Paypal ready.