F/S: 1.6 OBX Ceramic coated mani/downpipe,1.8 Injector(s), ALOT OF 1.6 PARTS!!! LMK!!
03-08-2012, 03:35 AM
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Simi valley
Posts: 203
Total Cats: -8
F/S: 1.6 OBX Ceramic coated mani/downpipe,1.8 Injector(s), ALOT OF 1.6 PARTS!!! LMK!!
All parts are in Simi Valley, CA 93065. I willl ship anything at the buyers expense. Some parts are still on the car, but the car isnt being driven now..
UPDATE: IM PULLING THE 1.6 MOTOR/TRANS THIS WEEK, SO I WILL BE POSTING UP MORE PARTS, ILL BE PARTING OUT THE SMALL-NOSE 1.6.... WHATEVER YOU NEED, LET ME KNOW. I WILL BE POSTING ALOT MORE PICS BY THE END OF THE WEEK
1.) Greddy Turbo Manifold 1.6- w/ relief cuts, it has all 4 turbo mount studs broken off. $80, take it to a machine shop to have them drill and tap new holes. comes sand blasted SOLD
2.) 1.8 Coil packs w/ mount and wires- $50 shipped
3.) 430cc Supra Injectors low-ohm- $50 shipped
4.) 1.8 Tan top injectors- $25 shipped
5.) Rear subframe/sway bar brace- $80
6.) TDTL Coated 1.6 Valve Cover(shinny black) , the coating releases heat- $100
7.) Ceramic coated 1.6 OBX turbo manifold- used for 2 months then went for a 1.8 swap... comes w/ hardware, also port matched both mounting surface runners, mounts up to a Greddy tdo4h, t25/t28- $100 it had awesome spool up.. i was runnnig about 10-12 degrees of timing at peak boost of 13psi, 91 oct CA... full boost by 3800rpm and it wasnt even dialed in yet...
8.) Custom 2.5" Downpipe for the Greddy td04h turbo, it will fit perfectly with the OBX turbo manifold im selling.. (#7). It is wrapped, has a flex pipe section, and has a 3'' outlet flange. It also has a bracket that mounts it to the tranny bolt... nice and sturdy.. $150
I want to sell the OBX manifold and downpipe together because they work together with the greddy td04h turbo.. $250.00/obo plus shipping
9.) 1.8 (BP05) Throttle body w/ accessories- $60 shipped
10.) 5 speed Miata Short Shifter- $25 shipped SOLD
11.) 1.6 Silicone upper radiator hose- $25 shipped
IM ALSO LOOKING FOR TRADES AS I AM DOING A 1.8 SWAP AT THE TIME.. LET ME KNOW WHAT YOU GOT!!!!
UPDATE: IM PULLING THE 1.6 MOTOR/TRANS THIS WEEK, SO I WILL BE POSTING UP MORE PARTS, ILL BE PARTING OUT THE SMALL-NOSE 1.6.... WHATEVER YOU NEED, LET ME KNOW. I WILL BE POSTING ALOT MORE PICS BY THE END OF THE WEEK
2.) 1.8 Coil packs w/ mount and wires- $50 shipped
3.) 430cc Supra Injectors low-ohm- $50 shipped
4.) 1.8 Tan top injectors- $25 shipped
5.) Rear subframe/sway bar brace- $80
6.) TDTL Coated 1.6 Valve Cover(shinny black) , the coating releases heat- $100
7.) Ceramic coated 1.6 OBX turbo manifold- used for 2 months then went for a 1.8 swap... comes w/ hardware, also port matched both mounting surface runners, mounts up to a Greddy tdo4h, t25/t28- $100 it had awesome spool up.. i was runnnig about 10-12 degrees of timing at peak boost of 13psi, 91 oct CA... full boost by 3800rpm and it wasnt even dialed in yet...
8.) Custom 2.5" Downpipe for the Greddy td04h turbo, it will fit perfectly with the OBX turbo manifold im selling.. (#7). It is wrapped, has a flex pipe section, and has a 3'' outlet flange. It also has a bracket that mounts it to the tranny bolt... nice and sturdy.. $150
I want to sell the OBX manifold and downpipe together because they work together with the greddy td04h turbo.. $250.00/obo plus shipping
9.) 1.8 (BP05) Throttle body w/ accessories- $60 shipped
11.) 1.6 Silicone upper radiator hose- $25 shipped
IM ALSO LOOKING FOR TRADES AS I AM DOING A 1.8 SWAP AT THE TIME.. LET ME KNOW WHAT YOU GOT!!!!
Last edited by amak87; 03-13-2012 at 10:47 PM. Reason: sold item
0
03-08-2012, 01:40 PM
#3
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Simi valley
Posts: 203
Total Cats: -8
thanks. hahah. you cant even see all that beautiful piping.. haha. ya took about $200 in custom pipiing and custom silicone bends and adapters to make it look smooth... wait till im done doing the 1.8 swap... its going to be stupid.. hahah
0
03-08-2012, 08:25 PM
#5
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Simi valley
Posts: 203
Total Cats: -8
bump... get a nice greddy TD04h compatable turbo manifold & Custom made 2.5'' Downpipe for a great deal. $200.00 + shipping and paypal fee. The manifold is gasket matched on the head side and turbo side, the downpipe is ported and super smooth.. I will post more pics as soon as I take the 1.6 motor out.
0
03-09-2012, 06:27 AM
#6
Newb
Join Date: Sep 2008
Posts: 15
Total Cats: 0
GReddy manifold and all 6 supra injectors, what would it cost to have these shipped to 10673 Athens Greece with USPS?
A.
A.
0
03-09-2012, 01:15 PM
#7
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Simi valley
Posts: 203
Total Cats: -8
TOTAL of $200 plus 3% paypal fee... my paypal is rthrlghlk@yahoo.com
I can ship any of these items today!!!!
0
03-09-2012, 03:48 PM
#8
Newb
Join Date: Sep 2008
Posts: 15
Total Cats: 0
Thanks for the price mate, but i m an idiot, injectors aint right for me. Sorry.
0
03-10-2012, 02:06 PM
#13
Junior Member
Join Date: Feb 2012
Location: socal
Posts: 71
Total Cats: -11
0
03-11-2012, 06:33 AM
#17
Newb
Join Date: Sep 2008
Posts: 15
Total Cats: 0
Money sent mate. Please read the instructions on the paypal message.
0
03-12-2012, 07:03 AM
#19
Junior Member
Join Date: Apr 2011
Posts: 59
Total Cats: 0
Nice setup, btw do think the downpipe could be mated to a 1.8 exhaust with a catback? or would the flange on the cat throw it off?
0
03-12-2012, 08:40 AM
#20
Newb
Join Date: Jun 2011
Posts: 12
Total Cats: 0
Interested in your 1.6 throttle body in the first pic.
How much shipped to 35757
I can't PM yet. you can email me at thecatJW @ gmail.com
How much shipped to 35757
I can't PM yet. you can email me at thecatJW @ gmail.com
0
