Greddy parts for sale: Los Angeles
12-31-2007, 04:40 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
Greddy parts for sale: Los Angeles
I ordered my BEGi kit today so I'm selling what's left of my Greddy kit, plus some random crap i have in storage. Prices do not include shipping but are negotiable. I'm in the Los Angeles area if you would prefer a pick up. I have multiple pictures of most of the parts if you'd like to see them first.
ETD Manifold: Good condition, no cracks. Drilled and tapped for an EGT probe. Cost $440 USD through ETD. Been on my car since March. $250
RM 2.5" Downpipe: I believe this is the same pipe as TurboTony's (correct me if I am wrong). It has a second O2 sensor bung installed for wideband. It is cracked near the turbo exhaust housing flange and it has some dents where it's contacted the tranny housing. $50
FM Heatshield: The back has been cut to accomodate the RM DP. Has a DIY polish job. The front hole that mounts to the valve cover is cracked but holds. There is also one spotweld that has broken. $25
Unopened minor rebuild kit for a TD04 from GPOPSHOP and TD04H-15G turbo: The turbine blades are fubared. Jim at GPOPSHOP says it will cost around $150-200 just to replace the blades and shaft, not including the cost of the rebuild itself. I'm just looking to recoup the cost for the rebuild kit. I'll throw in the snail for the shipping cost if you want it. $70
5-9 psi wastegate from FM: Brand new with actuator rod end. I was going to try this out on my turbo after I rebuilt it. I bought it before the holidays so I haven't had a chance to call them back to see if I can send it back for a refund. If anybody wants it, you can have it instead. $60 for both pieces.
Greddy intake elbow: DIY polish job. Not bad but could use some power buffing. I'll throw it in with any piece you purchase if you want it.
Carbon fiber side skirts for the NA: Good condition, never used. Some surface scratches that could probably be buffed out. $125 for the pair
17" Chrome motegis with some rubber: Had them for a summer and bent a rim on the 91. The other three are in good condition. Come on, you know you want em. Pick em up and name your price.
ETD Manifold: Good condition, no cracks. Drilled and tapped for an EGT probe. Cost $440 USD through ETD. Been on my car since March. $250
RM 2.5" Downpipe: I believe this is the same pipe as TurboTony's (correct me if I am wrong). It has a second O2 sensor bung installed for wideband. It is cracked near the turbo exhaust housing flange and it has some dents where it's contacted the tranny housing. $50
FM Heatshield: The back has been cut to accomodate the RM DP. Has a DIY polish job. The front hole that mounts to the valve cover is cracked but holds. There is also one spotweld that has broken. $25
Unopened minor rebuild kit for a TD04 from GPOPSHOP and TD04H-15G turbo: The turbine blades are fubared. Jim at GPOPSHOP says it will cost around $150-200 just to replace the blades and shaft, not including the cost of the rebuild itself. I'm just looking to recoup the cost for the rebuild kit. I'll throw in the snail for the shipping cost if you want it. $70
5-9 psi wastegate from FM: Brand new with actuator rod end. I was going to try this out on my turbo after I rebuilt it. I bought it before the holidays so I haven't had a chance to call them back to see if I can send it back for a refund. If anybody wants it, you can have it instead. $60 for both pieces.
Greddy intake elbow: DIY polish job. Not bad but could use some power buffing. I'll throw it in with any piece you purchase if you want it.
Carbon fiber side skirts for the NA: Good condition, never used. Some surface scratches that could probably be buffed out. $125 for the pair
17" Chrome motegis with some rubber: Had them for a summer and bent a rim on the 91. The other three are in good condition. Come on, you know you want em. Pick em up and name your price.
Reply
0
0
01-01-2008, 09:21 AM
#4
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Unopened minor rebuild kit for a TD04 from GPOPSHOP and TD04H-15G turbo: The turbine blades are fubared. Jim at GPOPSHOP says it will cost around $150-200 just to replace the blades and shaft, not including the cost of the rebuild itself. I'm just looking to recoup the cost for the rebuild kit. I'll throw in the snail for the shipping cost if you want it. $70
Please give total shipped to 30548 & paypal id. Thx.
Reply
0
0
01-01-2008, 03:13 PM
#7
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
yup, rough estimate for both but it should be close. I can send via any of those shippers so let me know which one you prefer and I can get you a final cost if you like.
Reply
0
0
01-01-2008, 11:02 PM
#9
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
Paperchasin,
Give me your email and I'll send you some pics. As far as I know, the skirts are one-ofs. I honestly can't remember how exactly they were supposed to be mounted but I recall that the design was based on one of the popular ricer kits if that helps.
Give me your email and I'll send you some pics. As far as I know, the skirts are one-ofs. I honestly can't remember how exactly they were supposed to be mounted but I recall that the design was based on one of the popular ricer kits if that helps.
Reply
0
0
01-04-2008, 11:49 AM
#14
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
Update on Wastgate Actuator and Rod End:
Flyin Miata will give me a refund with a 10% restocking fee, if nobody is interested. I'd much rather sell it to a member who could use it. I'll entertain any reasonable offer so if you think you might be interested, let me know in the next couple of days. It's brand new with the shipping box opened to check contents. I have until the 24th to get it back to FM.
Flyin Miata will give me a refund with a 10% restocking fee, if nobody is interested. I'd much rather sell it to a member who could use it. I'll entertain any reasonable offer so if you think you might be interested, let me know in the next couple of days. It's brand new with the shipping box opened to check contents. I have until the 24th to get it back to FM.
Reply
0
0
01-05-2008, 04:50 PM
#16
Were you planning on using it with the Greddy turbo?
Update on Wastgate Actuator and Rod End:
Flyin Miata will give me a refund with a 10% restocking fee, if nobody is interested. I'd much rather sell it to a member who could use it. I'll entertain any reasonable offer so if you think you might be interested, let me know in the next couple of days. It's brand new with the shipping box opened to check contents. I have until the 24th to get it back to FM.
Flyin Miata will give me a refund with a 10% restocking fee, if nobody is interested. I'd much rather sell it to a member who could use it. I'll entertain any reasonable offer so if you think you might be interested, let me know in the next couple of days. It's brand new with the shipping box opened to check contents. I have until the 24th to get it back to FM.
Reply
0
0
01-05-2008, 05:30 PM
#17
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
Yeah, but it needs modification. The rod needs to be extended for sure. I was going to order this rod extender from ATP and give it a shot:
http://www.atpturbo.com/Merchant2/me...egory_Code=BCS
It's a bit of an investment but it was worth the try for me.
http://www.atpturbo.com/Merchant2/me...egory_Code=BCS
It's a bit of an investment but it was worth the try for me.
Reply
0
0
01-05-2008, 05:36 PM
#19
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
The stock Greddy actuator is a piece of crap that can't hold much past 8 psi to redline without band-aid modification. If you want details, just do a search. There's plenty written about it on this forum.
Reply
0
0
