Parting out 1990 Miata
#1
Junior Member
Thread Starter
iTrader: (11)
Join Date: Jul 2013
Location: Fort Worth, TX
Posts: 254
Total Cats: -3
Parting out 1990 Miata
Hi guys,
Due to a blown engine, I have decided to part out my '90 project turbo car and get something else. Shipping not included.Lots of goodies as you can see from the pictures:
-Brand New Dunlop Direzza Z2s on BMW E30s. 400.
-Brand New Koni Yellows (only installed never driven on- 0 miles) with Hand R lowering springs and nb top hats. SOLD
-ACT Heavy Duty (HD) Clutch Kit FOR MAZDA MIATA - ZM1-HDR4...never run again only installed. Also have an unused brand new 1.6l flywheel to go with it. 250 for the clutch. 275 if you buy the flywheel too. 50 for just the flywheel.
-Transmission. Works fine50
-4.1 torsen. Comes with Poly bushings installed. 500
-1.8 driveshaft. 50.
-Turbo stuff...couplers, intercooler piping, fm blow off valve, sr20 t25 turbo (freshly rebuilt), downpipe, manifold...
Manifold and downpipe (both homemade will post pics on request). 125 for both.
Sr20 t25. SOLD
Blow off valve. SOLD
Intercooler piping (cut to fit with current setup--have some extra pipes that I will include that have no been cut or modified) and couplers. SOLD
Intercooler. Has jb weld on the sides where I patched it..seals fine. 40.
Gauges, gauge pod, and sending units for gauges. 100.
Ai research t3 turbo a/r .45. Compressor housing DH 4/4. Comes with cast downpipe elbow. 50
Glowshift oil pressure gauge (no sender). 25.
Sunpro boost gauge. 20.
Random oil pressure gauge (no sender). 20.
-Engine stuff
Toyota cops with harness (harness looks ghetto but it works). 75
Good 1.6 block and crank from another motor. 40
CX Racing Radiator (has a small leak when warming up...does not leak at all when warmed up or cold). 50.
Aftermarket slim fans from silicone intakes with Ebay 12" fan shroud. 100.
Stainless brake and clutch lines both by Russell . SOLD.
Mazda competition motor mounts. Only installed. 0 miles. 60.
-Bumper covers with fresh paint. Center portion is damaged but has been repaired with epoxy. I will post more details if someone is interested.
Front cover has broken mounting tabs at bottom. 50
Rear cover in ok shape..has a burn mark from the exhaust on the rear side. 75.
Center piece. SOLD.
-rx7 red top injectors. Flow tested and cleaned by witch hunter performance. I still have the receipt documentation. 100.
-hard dog hard bar roll bar. In great shape. Would make an excellent addition to a track day toy. Comes with all fasteners. SOLD
I am sure I am missing some things so let me know what you need and I will get it to you. All prices are obo. Thanks for the interest.
Due to a blown engine, I have decided to part out my '90 project turbo car and get something else. Shipping not included.Lots of goodies as you can see from the pictures:
-Brand New Dunlop Direzza Z2s on BMW E30s. 400.
-Brand New Koni Yellows (only installed never driven on- 0 miles) with Hand R lowering springs and nb top hats. SOLD
-ACT Heavy Duty (HD) Clutch Kit FOR MAZDA MIATA - ZM1-HDR4...never run again only installed. Also have an unused brand new 1.6l flywheel to go with it. 250 for the clutch. 275 if you buy the flywheel too. 50 for just the flywheel.
-Transmission. Works fine50
-4.1 torsen. Comes with Poly bushings installed. 500
-1.8 driveshaft. 50.
-Turbo stuff...couplers, intercooler piping, fm blow off valve, sr20 t25 turbo (freshly rebuilt), downpipe, manifold...
Manifold and downpipe (both homemade will post pics on request). 125 for both.
Sr20 t25. SOLD
Blow off valve. SOLD
Intercooler piping (cut to fit with current setup--have some extra pipes that I will include that have no been cut or modified) and couplers. SOLD
Intercooler. Has jb weld on the sides where I patched it..seals fine. 40.
Gauges, gauge pod, and sending units for gauges. 100.
Ai research t3 turbo a/r .45. Compressor housing DH 4/4. Comes with cast downpipe elbow. 50
Glowshift oil pressure gauge (no sender). 25.
Sunpro boost gauge. 20.
Random oil pressure gauge (no sender). 20.
-Engine stuff
Toyota cops with harness (harness looks ghetto but it works). 75
Good 1.6 block and crank from another motor. 40
CX Racing Radiator (has a small leak when warming up...does not leak at all when warmed up or cold). 50.
Aftermarket slim fans from silicone intakes with Ebay 12" fan shroud. 100.
Stainless brake and clutch lines both by Russell . SOLD.
Mazda competition motor mounts. Only installed. 0 miles. 60.
-Bumper covers with fresh paint. Center portion is damaged but has been repaired with epoxy. I will post more details if someone is interested.
Front cover has broken mounting tabs at bottom. 50
Rear cover in ok shape..has a burn mark from the exhaust on the rear side. 75.
Center piece. SOLD.
-rx7 red top injectors. Flow tested and cleaned by witch hunter performance. I still have the receipt documentation. 100.
-hard dog hard bar roll bar. In great shape. Would make an excellent addition to a track day toy. Comes with all fasteners. SOLD
I am sure I am missing some things so let me know what you need and I will get it to you. All prices are obo. Thanks for the interest.
Last edited by gdoehl; 04-30-2015 at 09:17 AM.
#2
#4
I am looking for the upper portion only because I want to make the flat door panel for my nb. how much for the Rs upper portion shipped to 76018?
#14
#17
Northern Virginia does that include springs and NB top hats?