Possible 1.6 Turbo Part out
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2012
Location: MaryLand
Posts: 70
Total Cats: -4
Possible 1.6 Turbo Part out
I'm at the University of Maryland and I'm running low on funds. I am considering parting out my 91. First I would like to see if anyone would be interested in any of the parts I have to offer before I go about dismantling the car.
If you want pics shoot me a message at sebastianarrazola@gmail.com or pm me.
I have a rebuilt B6 (1.6L) 91 engine with a short nose crank. It was rebuilt @ 135K. I now have about 400 miles on the engine. Looking for pick ups for the engine.
The engine was built with... < $3000.00 >
(not trying to part the engine out)
- supertech springs
- wiseco pistons (9.0:1 distributed by flyin' miata)
- eagle rods (h beam)
- ARP head studs
- ARP main studs
- Flyin' Miata Rebuild Kit (gaskets and what not)
- The block was honed and machined by Rockville Ring and Baring
- The crank was machined and the nose was re-cut at the same place
The engine is connected to...
- A Flyin' Miata light weight flywheel < $ 250.00 >
- A Flyin' Miata Clutch & pressure plate < $ 325.00 >
- Mazdaspeed competition engine mounts < $ 40.00 each >
- Mishioto Radiator < $ 250.00 >
- Setrab Oil cooler with 8-AN fittings < $ 100.00 >
The turbo... < $ 250.00 >
- Its a small ishi-warner turbo (no shaft play)
- It was pulled off one of those svo mustangs from back in the day
- It was rebuild/ refurbished
- It is set at 14 psi but can do much more (around 20 psi); however, keep in mind it is still just a baby turbo.
- It is water cooled
- comes with oil fittings
Turbo components
- A no name intercooler < $ 40.00 >
- 1.5" - 2.5" inch piping w/ silicone elbows < $ 50.00 >
- ebay bov < $ 20.00 >
- Turbo Tony down pipe with clamps < $ 150.00 >
- Begi Iron exhaust Manifold < $ 220.00 >
- vacuum block with lines < $ 30.00 >
- 3 inch exhaust with magnaflow resonator and hi-flow cat < $ 230.00 >
- k & n conical filter < $ 10.00 >
Engine management / electronics / fuel injection
- Brain built Mega Squirt w/ ac loop < $ 350.00 >
- GM IAT < $ 15.00 >
- denso Vtps < $ 30.00 >
- magnacor 8.5 mm plugs < $ 60.00 >
- lc-1 wide band < $ 150.00 >
- FM mechanical boost gauge < $ 20.00 >
- ebay digital wide band gauge < $ 20.00 >
- 550 rc injectors < $ 150.00 >
- walbro 255 pump installed on a bp fuel pump unit < $ 90.00 >
Suspension
- Tein flex coil overs with 8 k on them < $ 1000.00 >
- Tien edfc (motors/ connectors/ and control console) < $ 190.00 >
I also have plenty of replacement body/ interior parts it interested.
** All is negotiable **
Please let me know if any of this interest you guys.
If you want pics shoot me a message at sebastianarrazola@gmail.com or pm me.
I have a rebuilt B6 (1.6L) 91 engine with a short nose crank. It was rebuilt @ 135K. I now have about 400 miles on the engine. Looking for pick ups for the engine.
The engine was built with... < $3000.00 >
(not trying to part the engine out)
- supertech springs
- wiseco pistons (9.0:1 distributed by flyin' miata)
- eagle rods (h beam)
- ARP head studs
- ARP main studs
- Flyin' Miata Rebuild Kit (gaskets and what not)
- The block was honed and machined by Rockville Ring and Baring
- The crank was machined and the nose was re-cut at the same place
The engine is connected to...
- A Flyin' Miata light weight flywheel < $ 250.00 >
- A Flyin' Miata Clutch & pressure plate < $ 325.00 >
- Mazdaspeed competition engine mounts < $ 40.00 each >
- Mishioto Radiator < $ 250.00 >
- Setrab Oil cooler with 8-AN fittings < $ 100.00 >
The turbo... < $ 250.00 >
- Its a small ishi-warner turbo (no shaft play)
- It was pulled off one of those svo mustangs from back in the day
- It was rebuild/ refurbished
- It is set at 14 psi but can do much more (around 20 psi); however, keep in mind it is still just a baby turbo.
- It is water cooled
- comes with oil fittings
Turbo components
- A no name intercooler < $ 40.00 >
- 1.5" - 2.5" inch piping w/ silicone elbows < $ 50.00 >
- ebay bov < $ 20.00 >
- Turbo Tony down pipe with clamps < $ 150.00 >
- Begi Iron exhaust Manifold < $ 220.00 >
- vacuum block with lines < $ 30.00 >
- 3 inch exhaust with magnaflow resonator and hi-flow cat < $ 230.00 >
- k & n conical filter < $ 10.00 >
Engine management / electronics / fuel injection
- Brain built Mega Squirt w/ ac loop < $ 350.00 >
- GM IAT < $ 15.00 >
- denso Vtps < $ 30.00 >
- magnacor 8.5 mm plugs < $ 60.00 >
- lc-1 wide band < $ 150.00 >
- FM mechanical boost gauge < $ 20.00 >
- ebay digital wide band gauge < $ 20.00 >
- 550 rc injectors < $ 150.00 >
- walbro 255 pump installed on a bp fuel pump unit < $ 90.00 >
Suspension
- Tein flex coil overs with 8 k on them < $ 1000.00 >
- Tien edfc (motors/ connectors/ and control console) < $ 190.00 >
I also have plenty of replacement body/ interior parts it interested.
** All is negotiable **
Please let me know if any of this interest you guys.
Last edited by Sebas; 10-17-2013 at 04:25 PM.
#2
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,596
Total Cats: 556
A lot of those parts are of interest to a lot of people on this forum, but it all depends on pricing.
Post up some prices, at least ballpark of what you are looking for, and you'll get a better response imo.
Post up some prices, at least ballpark of what you are looking for, and you'll get a better response imo.
#7
- A Flyin' Miata light weight flywheel < $ 250.00 >
- A Flyin' Miata Clutch & pressure plate < $ 325.00 >
- A no name intercooler < $ 40.00 >
- 1.5" - 2.5" inch piping w/ silicone elbows < $ 50.00 >
- ebay bov < $ 20.00 >
- Turbo Tony down pipe with clamps < $ 150.00 >
- 550 rc injectors < $ 150.00 >
Im interested in all of the above, can you get pictures of the intercooler, piping, and downpipe ?
I think all the prices are fair but the clutch and flywheel but im sure we could work out a deal.
- A Flyin' Miata Clutch & pressure plate < $ 325.00 >
- A no name intercooler < $ 40.00 >
- 1.5" - 2.5" inch piping w/ silicone elbows < $ 50.00 >
- ebay bov < $ 20.00 >
- Turbo Tony down pipe with clamps < $ 150.00 >
- 550 rc injectors < $ 150.00 >
Im interested in all of the above, can you get pictures of the intercooler, piping, and downpipe ?
I think all the prices are fair but the clutch and flywheel but im sure we could work out a deal.