91 Turbo Partout
12-23-2011, 03:02 PM
#1
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
91 Turbo Partout
Hey All,
My fiance wrecked my car yesterday. Spun it entering the freeway when she hit a patch of black ice and hit the center divider on the driver side. Bumper, fender, door, mirror, subframe, steering rack and radiator are all ruined. Everything else seems to be fine. I drove it home and it ran just fine. Didn't even over heat. I've been falling out of love with the car lately anyway. I haven't even autocrossed the thing in a year and a half. I really want to build a rally car so i'm going to use these funds to facilitate that.
Pics will trickle in of what I have and what I can take pictures of on the car. Parts will start coming off and shipping next week. Prices not including shipping unless otherwise stated. All parts for 1.6 unless otherwise noted.
Turbo Kit: Sold
Megasquirt II:
Sold
LC1 and Blue DB gauge:
Sold
Toyota Cops:
Not PNP, you'll have to wire in the weatherpack connector that I used. Comes with mounting bracket. Pics later today. 200 shipped
RX7 550cc Injectors:
Sold
Rear end:
Sold
Roll Bar:
Sold
Hard Dog Door Bars:
sold
Engine:
Sold
Trans:
5-speed. No grinds. Some bearing noise. 100 bucks
Suspension:
SD Revalved Bilsteins with 550 front, 350 rear springs. FCM Top hats, bumpstops, spring isolators, threaded collars. I love this suspension. Its the only thing that makes me want to fix and keep my car but I just need to keep focused on greener pastures. I'll get pics of the full coilover when I get them off. Here are pics of the shocks and the shock dyno. 1200 shipped obo
1.8 Brakes:
I will sell the Hawk HPS pads, rotors and caliper brakets for all 4 wheels for 150 bucks shipped. Pics next week when they're off the car.
Front pad sample (~6mm on front pads still)
Rear pad sample (~6.5mm on rear pads)
Hardtop:
sold
Soft Top:
Purchased from ebay, dont remember the seller name. Its vinyl, has rain gutters above the windows (awesome) and is in great shape and fits great as well. Comes with frame. 200
There will be more bits and bobs as I get the car apart and post up little things here and there. Stay tuned for pics and updates. All prices OBO but low-ballers will be kicked squar in the nuts.
My fiance wrecked my car yesterday. Spun it entering the freeway when she hit a patch of black ice and hit the center divider on the driver side. Bumper, fender, door, mirror, subframe, steering rack and radiator are all ruined. Everything else seems to be fine. I drove it home and it ran just fine. Didn't even over heat. I've been falling out of love with the car lately anyway. I haven't even autocrossed the thing in a year and a half. I really want to build a rally car so i'm going to use these funds to facilitate that.
Pics will trickle in of what I have and what I can take pictures of on the car. Parts will start coming off and shipping next week. Prices not including shipping unless otherwise stated. All parts for 1.6 unless otherwise noted.
Turbo Kit: Sold
Megasquirt II:
Sold
LC1 and Blue DB gauge:
Sold
Toyota Cops:
Not PNP, you'll have to wire in the weatherpack connector that I used. Comes with mounting bracket. Pics later today. 200 shipped
RX7 550cc Injectors:
Sold
Rear end:
Sold
Roll Bar:
Sold
Hard Dog Door Bars:
sold
Engine:
Sold
Trans:
5-speed. No grinds. Some bearing noise. 100 bucks
Suspension:
SD Revalved Bilsteins with 550 front, 350 rear springs. FCM Top hats, bumpstops, spring isolators, threaded collars. I love this suspension. Its the only thing that makes me want to fix and keep my car but I just need to keep focused on greener pastures. I'll get pics of the full coilover when I get them off. Here are pics of the shocks and the shock dyno. 1200 shipped obo
1.8 Brakes:
I will sell the Hawk HPS pads, rotors and caliper brakets for all 4 wheels for 150 bucks shipped. Pics next week when they're off the car.
Front pad sample (~6mm on front pads still)
Rear pad sample (~6.5mm on rear pads)
Hardtop:
sold
Soft Top:
Purchased from ebay, dont remember the seller name. Its vinyl, has rain gutters above the windows (awesome) and is in great shape and fits great as well. Comes with frame. 200
There will be more bits and bobs as I get the car apart and post up little things here and there. Stay tuned for pics and updates. All prices OBO but low-ballers will be kicked squar in the nuts.
Last edited by wayne_curr; 02-02-2012 at 05:13 PM.
0
12-23-2011, 03:33 PM
#2
Junior Member
Join Date: Oct 2010
Location: Turin (Italy)
Posts: 91
Total Cats: -1
interested in LC1!!
Paypal via MP please!!
Paypal via MP please!!
0
12-23-2011, 04:52 PM
#5
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
We'll see about parting the turbo kit. I'd rather sell it whole. We'll see how interest in the various parts works out.
Viper, I may be interested in shipping the rollbar. I've seen it done many times.
As a reminder, most parts wont start coming off until next week.
Viper, I may be interested in shipping the rollbar. I've seen it done many times.
As a reminder, most parts wont start coming off until next week.
0
12-23-2011, 06:12 PM
#6
Junior Member
Join Date: Aug 2011
Posts: 172
Total Cats: 0
Im a taker immediately for the turbo manifold. Money ready, tell me your price. Paypal paid within 24hr if price is good...
0
12-23-2011, 07:20 PM
#7
Newb
Join Date: Dec 2008
Posts: 15
Total Cats: 0
ill take the lc1 if the first guy backs out!
0
12-23-2011, 09:12 PM
#10
Newb
Join Date: Feb 2007
Posts: 24
Total Cats: -3
I will take the door bars
pm sent!
pm sent!
0
12-23-2011, 09:40 PM
#12
Newb
Join Date: Oct 2011
Location: Seattle, Wa
Posts: 32
Total Cats: 5
Interested in the hardtop and passenger fender. YGPM
Last edited by krisiun; 12-23-2011 at 11:16 PM.
0
12-24-2011, 03:54 AM
#14
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
Hey Guys,
There has been a ton of local interest in these parts. Locals definitely get first dibs. I've updated the original post with things that are pending sale or pretty much as good as sold.
Replied to some PMs.
There has been a ton of local interest in these parts. Locals definitely get first dibs. I've updated the original post with things that are pending sale or pretty much as good as sold.
Replied to some PMs.
0
12-24-2011, 03:04 PM
#17
Newb
Join Date: Sep 2008
Posts: 11
Total Cats: 0
i am interested in the brakes
0
12-24-2011, 04:07 PM
#18
Newb
Join Date: Dec 2011
Posts: 2
Total Cats: 0
driver fender and front bumper shipped to 07922?
0
12-24-2011, 10:48 PM
#19
Junior Member
Join Date: Aug 2011
Posts: 172
Total Cats: 0
Come on men, sell me the turbo manifold, please!! Im a serious buyer.
0
12-24-2011, 11:04 PM
#20
Elite Member
Thread Starter
iTrader: (8)
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 4
Que?!
Do you want the turbo and downpipe too? If so, then we can talk. The downpipe is worthless without this custom manifold. Also, unless you have fab skills, the manifold is useless without the downpipe.
ebomb21: the bumper and driver fender are ruined but there yours if you want them.
Happy Kwanzaa everybody.
Do you want the turbo and downpipe too? If so, then we can talk. The downpipe is worthless without this custom manifold. Also, unless you have fab skills, the manifold is useless without the downpipe.
ebomb21: the bumper and driver fender are ruined but there yours if you want them.
Happy Kwanzaa everybody.
0
