rx-7 oil cooler w/ oil filter relocation + fittings and AN lines!!
07-17-2013, 09:59 PM
#1
Bannisheded
Thread Starter
iTrader: (33)
Join Date: Jan 2009
Location: San Jose, CA
Posts: 1,056
Total Cats: -3
rx-7 oil cooler w/ oil filter relocation + fittings and AN lines!!
Decided to stay naturally aspirated until next year so i'm selling some of the parts i was gathering for my new turbo set-up.
Everything needed to set up an oil cooler and oil filter relocation.
-1991 FC rx7 OEM oil cooler w/ thermostat
-2x Earl SS -10AN fitting that screw into the oil cooler
-various -10AN 90* elbow fittings and straight fittings
-black -10AN hose. Various lengths
-SS -10AN hose with fittings crimped on, Various lengths
-oil filter sandwich plate(2 hoses running from the oil cooler attach here)
-2x oil filter relocation housings
all fittings, o-rings and brackets included for the relocation
The black AN hose with the fittings attached can be easily disassembled and be re-cut to the length you desire.
The SS AN hoses and lines are permanent as i had them made at a hydraulics shop.
You will need to figure out your own way to mount the cooler.
$200 shipped for everything
Everything needed to set up an oil cooler and oil filter relocation.
-1991 FC rx7 OEM oil cooler w/ thermostat
-2x Earl SS -10AN fitting that screw into the oil cooler
-various -10AN 90* elbow fittings and straight fittings
-black -10AN hose. Various lengths
-SS -10AN hose with fittings crimped on, Various lengths
-oil filter sandwich plate(2 hoses running from the oil cooler attach here)
-2x oil filter relocation housings
all fittings, o-rings and brackets included for the relocation
The black AN hose with the fittings attached can be easily disassembled and be re-cut to the length you desire.
The SS AN hoses and lines are permanent as i had them made at a hydraulics shop.
You will need to figure out your own way to mount the cooler.
$200 shipped for everything
0
07-25-2013, 10:28 PM
#5
Newb
Join Date: Oct 2011
Posts: 29
Total Cats: 2
Any chance you would be willing to ship this to Australia ?
0
07-30-2013, 04:33 PM
#7
Junior Member
Join Date: May 2013
Location: wisconsin
Posts: 58
Total Cats: 0
do you still have this?
0
07-30-2013, 05:03 PM
#9
Junior Member
Join Date: May 2013
Location: wisconsin
Posts: 58
Total Cats: 0
will you take 175? or are you firm at 200?
0
07-30-2013, 05:09 PM
#11
Junior Member
Join Date: May 2013
Location: wisconsin
Posts: 58
Total Cats: 0
ok. do you take pay pal? i can send the money now
0
07-30-2013, 05:53 PM
#13
Junior Member
Join Date: May 2013
Location: wisconsin
Posts: 58
Total Cats: 0
ok, i will email you the address as well
should i send the email to that one or a different one?
should i send the email to that one or a different one?
0
07-30-2013, 06:06 PM
#15
Junior Member
Join Date: May 2013
Location: wisconsin
Posts: 58
Total Cats: 0
sent money and address.
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
